Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Rear disc brake is rubbing [Solved]
#1
I have a brand new MTB and the rear disc break is already rubbing/squeaking. What are the easiest fixes? Thanks
  Reply
#2
Welcome to the wonderful world of disc brakes. What make and model? was it an internet purchase? Local bike shop? or a box store like Dick's or Walmart? Was it professionally assembled?
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
Santa Cruz Blur, professionally assembled from my local shop. They said the rotor was slightly bent but not enough to warrant reshaping it, they just back off the outer caliper. Which I could've done myself..


(01-11-2020, 07:52 PM)Painkiller Wrote:  Welcome to the wonderful world of disc brakes. What make and model? was it an internet purchase? Local bike shop? or a box store like Dick's or Walmart? Was it professionally assembled?
  Reply
#4
well just my opinion, If they are not going to do anything about it. I would replace the rotor, if you do not think you damaged the rotor, have them replace it. The only other thing it could be is contaminated pads/rotor. One other thing you could try is re-centering the caliper by loosening the two bolts, squeezing the lever and holding it while you re tighten the bolts.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
The bike shop adjusted the calipers and it seems fine. They said the rotor bend is so slight there was no need to replace it - I couldn't even see the bend in it but if it happens again, I'll take your suggestions. Thanks!

(01-11-2020, 08:28 PM)Painkiller Wrote:  well just my opinion, If they are not going to do anything about it. I would replace the rotor, if you do not think you damaged the rotor, have them replace it. The only other thing it could be is contaminated pads/rotor. One other thing you could try is re-centering the caliper by loosening the two bolts, squeezing the lever and holding it while you re tighten the bolts.
  Reply
#6
I had similar issue with my Merida mountain bike and hydraulic disc brakes, front one to be precise. I simply adjusted caliper with its mount bolts and we were ready to go!

   
Merida Scultura 5000 (2015)
Merida Big Nine 400 (2019)
  Reply
#7
Thanks very much for your reply!
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
A New Hope For Cheaper Bikes In 2025?! f...
Today 05:21 AM
Best suspension seat post?
Today 02:54 AM
Barefoot Shoes--- ON or OFF?
Yesterday 08:53 PM
New in ROC
Yesterday 08:50 PM
Greetings from W.N.Y.
Yesterday 08:42 PM
What must-know bike care tips are we ove...
Yesterday 08:39 PM
Which cycling manager games are you play...
Yesterday 06:42 PM
Injury Recovery
03-15-2025 01:22 PM
Energy gels for cycling
03-15-2025 01:14 PM
eBikes are banned in these places!
03-15-2025 12:59 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. rydabent
13 posts
no avatar 2. enkei
12 posts
no avatar 3. Flowrider
12 posts
no avatar 4. GirishH
10 posts
no avatar 5. SPINMAN
9 posts