Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Rear disc brake is rubbing [Solved]
#1
I have a brand new MTB and the rear disc break is already rubbing/squeaking. What are the easiest fixes? Thanks
  Reply
#2
Welcome to the wonderful world of disc brakes. What make and model? was it an internet purchase? Local bike shop? or a box store like Dick's or Walmart? Was it professionally assembled?
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
Santa Cruz Blur, professionally assembled from my local shop. They said the rotor was slightly bent but not enough to warrant reshaping it, they just back off the outer caliper. Which I could've done myself..


(01-11-2020, 07:52 PM)Painkiller Wrote:  Welcome to the wonderful world of disc brakes. What make and model? was it an internet purchase? Local bike shop? or a box store like Dick's or Walmart? Was it professionally assembled?
  Reply
#4
well just my opinion, If they are not going to do anything about it. I would replace the rotor, if you do not think you damaged the rotor, have them replace it. The only other thing it could be is contaminated pads/rotor. One other thing you could try is re-centering the caliper by loosening the two bolts, squeezing the lever and holding it while you re tighten the bolts.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
The bike shop adjusted the calipers and it seems fine. They said the rotor bend is so slight there was no need to replace it - I couldn't even see the bend in it but if it happens again, I'll take your suggestions. Thanks!

(01-11-2020, 08:28 PM)Painkiller Wrote:  well just my opinion, If they are not going to do anything about it. I would replace the rotor, if you do not think you damaged the rotor, have them replace it. The only other thing it could be is contaminated pads/rotor. One other thing you could try is re-centering the caliper by loosening the two bolts, squeezing the lever and holding it while you re tighten the bolts.
  Reply
#6
I had similar issue with my Merida mountain bike and hydraulic disc brakes, front one to be precise. I simply adjusted caliper with its mount bolts and we were ready to go!

   
Merida Scultura 5000 (2015)
Merida Big Nine 400 (2019)
  Reply
#7
Thanks very much for your reply!
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
What tools have you bought recently?
Yesterday 06:57 PM
Santini fluted frame
Yesterday 06:47 PM
Expensive bikes with crappy wheels
Yesterday 10:15 AM
Where are you from and What is your favo...
03-27-2024 11:43 PM
2007 Trek Pilot S.P.A. 5.2
03-27-2024 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. meamoantonio
15 posts
no avatar 4. Jesper
15 posts
no avatar 5. GirishH
15 posts