Rear disc brake is rubbing [Solved]

dwc7 · 01-11-2020, 06:07 PM

I have a brand new MTB and the rear disc break is already rubbing/squeaking. What are the easiest fixes? Thanks

Painkiller · 01-11-2020, 07:52 PM

Welcome to the wonderful world of disc brakes. What make and model? was it an internet purchase? Local bike shop? or a box store like Dick's or Walmart? Was it professionally assembled?

dwc7 · 01-11-2020, 08:16 PM

Santa Cruz Blur, professionally assembled from my local shop. They said the rotor was slightly bent but not enough to warrant reshaping it, they just back off the outer caliper. Which I could've done myself..

(01-11-2020, 07:52 PM)Painkiller Wrote: Welcome to the wonderful world of disc brakes. What make and model? was it an internet purchase? Local bike shop? or a box store like Dick's or Walmart? Was it professionally assembled?

Painkiller · 01-11-2020, 08:28 PM

well just my opinion, If they are not going to do anything about it. I would replace the rotor, if you do not think you damaged the rotor, have them replace it. The only other thing it could be is contaminated pads/rotor. One other thing you could try is re-centering the caliper by loosening the two bolts, squeezing the lever and holding it while you re tighten the bolts.

dwc7 · 01-11-2020, 09:13 PM

The bike shop adjusted the calipers and it seems fine. They said the rotor bend is so slight there was no need to replace it - I couldn't even see the bend in it but if it happens again, I'll take your suggestions. Thanks!

(01-11-2020, 08:28 PM)Painkiller Wrote: well just my opinion, If they are not going to do anything about it. I would replace the rotor, if you do not think you damaged the rotor, have them replace it. The only other thing it could be is contaminated pads/rotor. One other thing you could try is re-centering the caliper by loosening the two bolts, squeezing the lever and holding it while you re tighten the bolts.

Zviedrs · 01-13-2020, 11:22 AM

I had similar issue with my Merida mountain bike and hydraulic disc brakes, front one to be precise. I simply adjusted caliper with its mount bolts and we were ready to go!

dwc7 · 01-13-2020, 03:17 PM

Thanks very much for your reply!

10 Latest Posts
1987 Tommaso Alloy lugged frame Today 11:18 AM
Injury Recovery Today 08:20 AM
RECOMMENDATION Yesterday 04:24 PM
New Member Yesterday 03:31 PM
2011 GT Tachyon upgrade/mod Yesterday 08:45 AM
Doctors are Prescribing Cycling 04-23-2025 09:50 PM
What was your first bicycle? 04-23-2025 09:17 PM
New Rider Here — Momo + Viribus = Ready ... 04-23-2025 09:15 PM
The great thing about trikes 04-23-2025 03:47 AM
New member old rider 04-22-2025 06:32 PM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom