Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the September Giveaway for a Spider Rear Rack and a Heavy Duty Drybag from aeroe


How many bearings should there be?
#1
I'm overhauling the headset on this crusty Supercycle.

Should there be this much space between bearings? Should I fill in races with more bearings?

I'm also curious as to the size of the bearings, they are definitely smaller than the 3/16" and I'm not familiar with them.

Thanks!
  Reply
#2
Ahhh there is finally another head set like the Armstrong 3spd I have Smile. Answer is no you are missing maybe 3 bearings. You will definitely want to replace all of those. Umm I think I listed the size that I used on my Armstrong thread.
http://forums.bikeride.com/thread-1643.html
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
Well, take a caliper and measure one bearing...

Then, put as much ball bearings you can, minus 1...

There you go!
  Reply
#4
Looks like the bottom race is missing 3 bearings and the top 1. There should be play between bearings totaling about one bearing. Do not jam the bearings in tightly. Scrub your races well with a plastic dish cleaning pad like scotch brite dipped in oil or WD40 till clean. Take a bearing to a hardware store or better bicycle store and get all new stainless steel bearings, than use good marine waterproof bearing grease, if you can, and lubricate well. Wipe off excess after assembly.
Never Give Up!!!
  Reply
#5
Putting this back together is a little tricky! When you put the new grease in just add a little more so the bearing will stick to the race and not fall out. Sorry I looked over my own post mentioned earlier and I guess I did not say the size of bearings. However I think they are a weird size like 7/32. As front wheels are 1/4 and rear wheels take 3/16. Definitely listened to Geoge and bob. BTW Hey bob longtime old friend.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#6
Thanks for the feedback everyone. I'll pick up new bearings and grease these puppies up good.

No worries Bill,it was an interesting thread nonetheless.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
12,113
05-26-2015, 02:31 PM
Last Post: eric1023
 
22,251
01-13-2015, 12:13 PM
Last Post: joseph wolf man
 
5,026
12-25-2013, 07:11 AM
Last Post: SchwinnMonkey
 
18,113
06-28-2011, 12:00 PM
Last Post: nfmisso
 
17,329
05-17-2011, 01:07 AM
Last Post: AndrewB
 
5,415
03-28-2011, 11:52 PM
Last Post: Bill

Forum Jump:

[-]
10 Latest Posts
Chris King
Today 09:37 AM
Where are you from and What is your favo...
Yesterday 04:03 PM
Georgena Terry Gambit road bike
Yesterday 04:54 AM
Hello from Wyoming
Yesterday 02:56 AM
Core exercises for cyclists
Yesterday 02:19 AM
Rear V-Brake leaning to one side
09-27-2020 10:16 AM
2020 road cycling season
09-26-2020 07:12 PM
Saddle Height
09-26-2020 07:08 PM
Front Derailer fails to shift to the big...
09-26-2020 06:12 AM
Spin bike question
09-25-2020 10:45 AM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
31 posts
no avatar 2. Papa Dom
11 posts
no avatar 3. Painkiller
10 posts
no avatar 4. G_M
9 posts
no avatar 5. JoJoJo
6 posts