Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Frozen front suspension
#1
I purchased a used specialized hardrock with the original RST gila suspention fork, but it is frozen and won't move under normal use.  I've removed the lower screws and attempted to hit it with a rubber mallet like the guy in this video does to the exact same shock, but it won't move.  I've also gotten a car jack in between the break arm of the shock and the top of the fork, and i've cranked it up. the shock lowers move about an inch but then the jack pops out and they rebound back to where they were instantly and i have to lower the jack again to get it in.  what could be holding the shocks in place like this? they don't seem to be rusted closed since they move a little.



https://www.youtube.com/watch?v=d534ilYCaMk
  Reply
#2
not worth the hassle, the fork is not that great when it was new. Replacement is the way to go. Shocks of that caliber you can buy all day long for $100 bucks or so. RJ likes to make video's, he bought a $60 pile of crap, worked over the crap fork, got it working in some fashion but still has rusty sliders that look like crap, work like junk and still has a $60 bike. if you want a bike to go the extra mile and are keeping it. Buy a new one. The problem with bicycles with shocks is they are expensive if you want a real fork, and bikes in the $400 to even $800 and cheaper are pretty much weak and really only made for light trail use only. Then when they fail you get rid of the bike or like the bike well enough to lay down the cash to make it nice again. Then after a few years if you are lucky enough to go a few years, it will be hard to get the parts needed to service the fork. If you cannot do the service yourself if you found the parts then the hourly price of a bike shop would totally not make much sense to rebuild the fork at all vs. buying a new one. It is better to give your money to a new shock rather than towards labor for work on an old shock. The average person probably could fit a new threadless fork by themselves if they took their time. If you would like your bars up a bit higher, a new fork would allow you to make those changes also.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
6,479
09-02-2017, 08:38 AM
Last Post: WesleyNL
 
3,736
10-25-2015, 06:23 AM
Last Post: Eugbug
 
12,519
05-26-2013, 09:05 AM
Last Post: Painkiller
 
12,240
02-06-2013, 11:07 AM
Last Post: Dan
 
11,641
12-16-2010, 06:58 PM
Last Post: JonB
 
16,628
10-10-2010, 06:48 AM
Last Post: xerxes

Forum Jump:

[-]
10 Latest Posts
Pre Ride Food Intake
Today 02:43 AM
Post-Ride Nutrition
Today 02:40 AM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
Yesterday 06:15 PM
Zwift v Spin v Wahoo
Yesterday 05:59 PM
Have you Ever Tried an Electric Bike?
Yesterday 05:07 PM
SAVA Explorer 6061?
Yesterday 03:31 PM
Good Morning from SW Ohio
Yesterday 07:32 AM
(So California) PV Dr to be closed to bi...
03-31-2025 09:14 PM
Tubeless vs. tubes: What are the pros an...
03-31-2025 08:28 AM
The great thing about trikes
03-31-2025 08:16 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
19 posts
no avatar 2. Flowrider
19 posts
no avatar 3. meamoantonio
12 posts
no avatar 4. Jake1
10 posts
no avatar 5. enkei
9 posts