Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


Hyper havoc issues
#1
We just bought a hyper havoc within the last 2 months and have only ridden it a handful of times. My issue is the other night as we were riding along the chain snapped off. Looked like it broke? We just started riding again recently so we're not familiar with these new bikes at all. Do I need to buy a new chain or can this one be fixed? I snapped it back together but I just don't know if it'll last or what. Lol I apologize for my ignorance about anything mechanical lol.
  Reply
#2
Snapped it back together sounds like a quick disconnect came apart which it shouldn't do unless worn or not seated ("clicked" together)
Post a picture of the link in question. If the link didn't look different from the others it's not a quick disconnect. Here are some pics of one type of QR link.
  Reply
#3
It looks kind of like that yes. I'll post a pic just give me one sec
  Reply
#4
(08-25-2014, 12:17 AM)1FJEF Wrote:  Snapped it back together sounds like a quick disconnect came apart which it shouldn't do unless worn or not seated ("clicked" together)
Post a picture of the link in question. If the link didn't look different from the others it's not a quick disconnect. Here are some pics of one type of QR link.
  Reply
#5
OK, there's a lack of detail in the pic. I don't see elongation in the link like a quality QR. It's a fairly inexpensive bike, so I wouldn't expect a QR link anyway.
By the way, did you mark it yellow?
I would not trust the chain;
1) Replace the chain with a Walmart chain (Bell brand $10ish). The QR link is a little funky but OK.
2) Replace the chain with a better chain with a better QR link, $15-$20ish. The new chain should be the same length or maybe a link longer. (This is an involved topic). An 8 speed chain is OK. Here's another, a Z51. Here's a good deal.
3) Replace the link with a QR link. This is iffy because I'm not confident in the chain.
4) Go have a local bike shop replace the chain. You'll probably end up with a chain with no QR link. This will cost more because of a minimal labor fee, but you wont have to buy a chain tool or fuss with shortening a new chain in ideas 1) & 2).
If the chain comes apart at the wrong moment it can be painful. I just looked online & walmart has changed to a different brand. You need a 3/32" chain, not an 1/8" wide by the way.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
2,463
06-05-2020, 03:56 PM
Last Post: ollie.olsson
 
3,359
05-25-2020, 09:56 PM
Last Post: Painkiller
 
3,756
05-03-2020, 08:45 AM
Last Post: CharleyFarley
 
6,230
01-07-2020, 03:37 PM
Last Post: Bam Bam
 
7,705
06-06-2014, 11:25 AM
Last Post: nfmisso
 
9,963
05-02-2014, 02:46 PM
Last Post: cny-man

Forum Jump:

[-]
10 Latest Posts
Tour of Luzon 70 years of Filipino Cycli...
Today 01:22 AM
What are the best cost effective ways to...
Today 01:19 AM
RECOMMENDATION
Today 01:04 AM
Injury Recovery
Yesterday 07:33 PM
Good morning form Alberta CA
Yesterday 09:40 AM
Unlocking speed on my e-bike.
04-27-2025 01:04 PM
MTB handlebar width
04-27-2025 06:25 AM
What is your favorite MTB trail/route in...
04-27-2025 06:16 AM
Bridgestone Blouson bike.
04-26-2025 07:57 PM
Thoughts on paceline riding
04-26-2025 05:51 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. enkei
16 posts
no avatar 3. Flowrider
15 posts
no avatar 4. meamoantonio
15 posts
no avatar 5. SPINMAN
13 posts