Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the November Giveaway for a Chance to Win a Hybrid E-Bike Worth $1329


Internal cable issue
#1
[attachment=4841]I have a non-branded carbon fiber TT bike (Cervelo P3) purchased on the internet. It looks very similar to the picture posted. The problem is once the shift cables are installed and adjusted the shifting only works a couple of times or less and then hangs up and the cable binds up somehow and the bike will not change gears. When you take the tension off, the cable will slide back and forth thru the housing without hanging up. Has anyone experienced this before? Is there a way to replace the internal housing? I think the frame is not hollow and has plates that the housing must travel through to get from one end to the other. Any thoughts will be greatly appreciated.

OKC
  Reply
#2
No idea on the frame. But if the cable slides smooth when you move it by hand, my guess would be that the shifter is binding, not the cable. YMMV
  Reply
#3
In which direction does it bind, or is it in both? Is it both cables, or just one? As for replacement, although most are similar there is not a standardized way internal routing is handled.

Your problem may need an in-person evaluation/assist.
  Reply
#4
Bike shop removed shifter and just pulled on the cable by hand and it bound up. It binds when pulled in either direction. The external housing was replaced. The top piece and original cable had rust on them. The problem was initially on the front chain shifting but now is on both, it is almost like there is something loose inside the housing that gets caught when under pressure. Thanks for input.

OKC
  Reply
#5
(01-25-2014, 07:32 PM)okcmaestro Wrote:  Bike shop removed shifter and just pulled on the cable by hand and it bound up. It binds when pulled in either direction. The external housing was replaced. The top piece and original cable had rust on them. The problem was initially on the front chain shifting but now is on both, it is almost like there is something loose inside the housing that gets caught when under pressure. Thanks for input.

OKC

OKC - got exactly the same frame (Chinese import) and have just had the exact same problem - from mech lost all tension on the first ride out and now I can't get the shifter onto the big ring. Took it to the lbs and they said the internal routing was causing it to bind up somwhere when trying to increase tension. I really don't understand how - have you had any luck getting to the bottom of it? It's only the front mech at the moment but am worried as you say yours is now front and back.??
  Reply
#6
No one here has an idea other than a carbon fiber repair guy that would cut the bike open and then patch it up. That would cost about what i could get a new frame for , so that is out. Once the front went, I put a couple of hundred miles on it then the back went out.
  Reply
#7
if you have a dentist or doctor friend or lab friend with an x-ray machine.........
Nigel
  Reply
#8
Is there no way you can run an outer the whole way through for the rear mech?
  Reply
#9
And an off the wall suggestion - convert it to a SS or fixie; or sell the frame to someone who does want to make a SS or fixie, and get yourself a different frame.
Nigel
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
2,641
05-01-2024, 10:31 AM
Last Post: Nutribun
 
2,408
01-27-2024, 08:38 AM
Last Post: Talha
 
8,073
12-08-2019, 08:18 AM
Last Post: CharleyFarley
 
8,807
02-24-2017, 12:45 PM
Last Post: Mountain
 
17,338
10-22-2014, 08:38 AM
Last Post: cny-man
 
8,020
01-11-2014, 04:16 PM
Last Post: mhaughee

Forum Jump:

[-]
10 Latest Posts
What was your favourite bicycle?
Today 06:23 PM
Traveling to texas
12-10-2024 10:06 PM
Remedies for contaminated disc rotors
12-10-2024 07:29 PM
Gears and derailleur misalignment
12-10-2024 05:15 PM
What was your first bicycle?
12-10-2024 01:41 AM
Andre leducq bike. Any idea on value
12-09-2024 11:51 PM
Pogačar's 2024 dominance
12-09-2024 07:48 PM
Beginner Mountain Biking Tips
12-09-2024 05:55 PM
How often check or change mechanical dis...
12-09-2024 12:44 AM
Looking for Recommendations: E-Trike for...
12-08-2024 10:50 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Alexjohnson
35 posts
no avatar 2. GirishH
16 posts
no avatar 3. meamoantonio
11 posts
no avatar 4. Flowrider
11 posts
no avatar 5. ReapThaWhirlwind
9 posts