Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the July Giveaway for a brand new 26" Thruster® Street Style BMX Cruiser Bicycle


Loose headset / fork / bearings? (it's a threadless)
#1
Hi

I got a bike from a friend for free, and I've restored it pretty good so far. Wink

But I'm a bit reluctant to go ride it because the headset is loose. I can tighten the top fork-nut all the way with force, but this does'nt remove the play as it should..

So the way I'm achieving minimal play/looseness, is to press the bike forward and downward hard, and then tightening first the top nut and then side nuts.

But this can't be a solid or good solution. I'm guessing it could be the star fangled nut not being positioned right. Or messed up bearings/cup/cone.
Any ideas or advice.. Can I fix this myself? (without buying expensive tools)
Hope someone can help. Thank you.

[attachment=112]
[attachment=113]
  Reply
#2
Wow this is a good one I am interested in this as I have a bike that was donated to me that has this type of setup. Later today I will jump into mine and see if I can assist ya on this, it will be later today before I reply. I'm sure someone here will have the answer before then.

Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
Your first photo shows the star nut with the adjusting screw in.<br />
This screw should go through the top cap first, then into the star nut.<br />
Remove the screw completely.<br />
Put the screw through the top cap and then place cap on and tighten down.<br />
The rest is as you explain.<br />
Loosen the 2 side bolts on the stem.<br />
Tighten the star screw to take up the slop in the headset bearings but not too tight that the steering is stiff.<br />
Now finaly tighten the 2 side screws making sure the stem is aligned to the front wheel.

Ride hard or ride home alone!
  Reply
#4
Ah ok. The plastic-cap got loose on the way and the top bolt now goes through the hole. This cap is important as a spacer? I just thought &quot;nevermind.. a bike can't rely on plastic&quot; Smile

  Reply
#5
Most caps are metal (Aluminium). The star nut grips the inside of the steerer tube and relies on the top cap to do the initial tension to the bearings.
When the 2 side screws are done up then the star screw isn't needed until the next time an adjustment is required.
You could use a large washer (with a small hole) to replace the top cap temporarily. It is important that you maintain a small amount of clearance between the top of the stem and the steerer tube. (which you have in the photo).

Ride hard or ride home alone!
  Reply
#6
Thank you

  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
1980 Schwinn Suburban
Today 09:22 AM
Pain from bike saddle.
Today 07:27 AM
26" Thruster® Street Style BMX | July 20...
Today 01:53 AM
Pinging noise fixed
Yesterday 09:02 PM
COLSON TANDEM BIKE REAR STEERING
Yesterday 08:39 PM
Need help finding a new rear derailleur
Yesterday 06:56 PM
Work Table For Wheels
Yesterday 02:05 PM
road bike purchase help please
Yesterday 12:27 PM
Saddle Height
Yesterday 09:50 AM
What would be a fair price for this?
Yesterday 02:54 AM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
59 posts
no avatar 2. Painkiller
18 posts
no avatar 3. CharleyFarley
14 posts
no avatar 4. Joe_W
11 posts
no avatar 5. Papa Dom
10 posts