Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

Best Black Friday E-Bike Deals 2024 | Up to $1,700 in Savings

New: Take Part in the November Giveaway: Starts November 18th


Loose headset / fork / bearings? (it's a threadless)
#1
Hi

I got a bike from a friend for free, and I've restored it pretty good so far. Wink

But I'm a bit reluctant to go ride it because the headset is loose. I can tighten the top fork-nut all the way with force, but this does'nt remove the play as it should..

So the way I'm achieving minimal play/looseness, is to press the bike forward and downward hard, and then tightening first the top nut and then side nuts.

But this can't be a solid or good solution. I'm guessing it could be the star fangled nut not being positioned right. Or messed up bearings/cup/cone.
Any ideas or advice.. Can I fix this myself? (without buying expensive tools)
Hope someone can help. Thank you.

[attachment=112]
[attachment=113]
  Reply
#2
Wow this is a good one I am interested in this as I have a bike that was donated to me that has this type of setup. Later today I will jump into mine and see if I can assist ya on this, it will be later today before I reply. I'm sure someone here will have the answer before then.

Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
Your first photo shows the star nut with the adjusting screw in.<br />
This screw should go through the top cap first, then into the star nut.<br />
Remove the screw completely.<br />
Put the screw through the top cap and then place cap on and tighten down.<br />
The rest is as you explain.<br />
Loosen the 2 side bolts on the stem.<br />
Tighten the star screw to take up the slop in the headset bearings but not too tight that the steering is stiff.<br />
Now finaly tighten the 2 side screws making sure the stem is aligned to the front wheel.

Ride hard or ride home alone!
  Reply
#4
Ah ok. The plastic-cap got loose on the way and the top bolt now goes through the hole. This cap is important as a spacer? I just thought &quot;nevermind.. a bike can't rely on plastic&quot; Smile

  Reply
#5
Most caps are metal (Aluminium). The star nut grips the inside of the steerer tube and relies on the top cap to do the initial tension to the bearings.
When the 2 side screws are done up then the star screw isn't needed until the next time an adjustment is required.
You could use a large washer (with a small hole) to replace the top cap temporarily. It is important that you maintain a small amount of clearance between the top of the stem and the steerer tube. (which you have in the photo).

Ride hard or ride home alone!
  Reply
#6
Thank you

  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
3,478
02-07-2022, 02:46 PM
Last Post: Jesper
 
3,677
08-30-2021, 03:46 AM
Last Post: Poissonj1
 
20,644
05-26-2015, 02:31 PM
Last Post: eric1023
 
11,389
01-18-2015, 12:16 PM
Last Post: nfmisso
 
45,654
01-13-2015, 12:13 PM
Last Post: joseph wolf man
 
19,432
09-16-2014, 01:39 PM
Last Post: GeorgeET

Forum Jump:

[-]
10 Latest Posts
Moving in Style: Beyond Regular Transpor...
Yesterday 09:23 PM
Tire Sizing (Or How to Buy A Tire)
Yesterday 12:36 PM
The Roaming Radrunner Vlog 1 Why ride ...
Yesterday 09:17 AM
Recording Bike Rides
11-20-2024 01:37 AM
Ketone Ester $$$
11-19-2024 01:04 AM
Trek domane tyre
11-18-2024 01:58 PM
Old fossil buys Ebike
11-17-2024 06:39 AM
Bike bus
11-17-2024 12:14 AM
Second wheelset for ebike.
11-16-2024 08:20 PM
Humber "Eiffel Safety" bike 1800s
11-16-2024 03:05 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
22 posts
no avatar 2. enkei
19 posts
no avatar 3. GirishH
14 posts
no avatar 4. Flowrider
11 posts
no avatar 5. ReapThaWhirlwind
11 posts