Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the October Giveaway to Win the Qiolor TIGER Retro Electric Bike


Carbon Frame alignment.
#1
Hi Guys,
just a thought. I have had the time to repair a BB and a rear mech on carbon frames for friends. I used the park tool for checking dropouts on the rear and the front fork and have found quite an offset. Maybe not to feel as you ride but the wear on the tire and the wheel bearing must be a problem. On a steel frame this is easily repaired using the tool, but a carbon? Has any body else come across this? Thanks and ride safe.
  Reply
#2
Are you, perhaps, over-thinking this one? I wouldn't touch it with a Ten Foot Pole!
Excluding some very "inexpensive" CF frames from the Asias, most mfr's go to great lengths during the R&D phase to ensure that, once the mold is made, the frame emerges 'as per spec'. A mold (say, a Trek Madone 3.1 in the 56 cm size) may cost as much as $8,000 to have made. JUST for that 56. All other sizes have thier own mold.
Hmmm.. how did I get off on that tangent? Anyway...

No. Don't try to reshape anything carbon.
Wheelies don't pop themselves. (from a QBP fortune cookie)
  Reply
#3
(08-20-2011, 08:52 PM)RobAR Wrote:  Are you, perhaps, over-thinking this one? I wouldn't touch it with a Ten Foot Pole!
Excluding some very "inexpensive" CF frames from the Asias, most mfr's go to great lengths during the R&D phase to ensure that, once the mold is made, the frame emerges 'as per spec'. A mold (say, a Trek Madone 3.1 in the 56 cm size) may cost as much as $8,000 to have made. JUST for that 56. All other sizes have thier own mold.
Hmmm.. how did I get off on that tangent? Anyway...

No. Don't try to reshape anything carbon.

My thought was that someone had come across the same thing. I am not talking about 8000 dollar frames. I was mentioning a normal frame ( made in Asia ) that had this problem.Any frame out of true is a problem, be it carbon, steel, whatever. I am not over thinking, just the way I have approached repairs for the last 25 years. Thanks for the tip not to reshape carbon.
  Reply
#4
Not talking about an $8000 frame, brother. An $8000 mold that the frame is made in. And 25 years is a good number. On 20 myself.
Wheelies don't pop themselves. (from a QBP fortune cookie)
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
5,332
07-13-2020, 03:40 PM
Last Post: Jesper
 
23,364
06-18-2015, 02:07 AM
Last Post: eastman
 
11,061
12-21-2014, 04:36 PM
Last Post: GeorgeET
 
10,907
02-23-2013, 01:20 PM
Last Post: Chuck

Forum Jump:

[-]
10 Latest Posts
Schwinn trike NOISE
Today 05:20 PM
Schwinn meridian rear drive axle
Today 04:36 PM
What was your first bicycle?
Yesterday 04:11 PM
Great UK Cycle Camping Map, For E-Bikes,...
Yesterday 05:38 AM
Charging at campground
Yesterday 05:33 AM
Failure to stop at stop sign means $500 ...
Yesterday 05:27 AM
Bicycle enthusiast located in California
Yesterday 04:15 AM
Moving in Style: Beyond Regular Transpor...
Yesterday 01:29 AM
Do you plan or random ride your MTB ride...
11-02-2024 11:43 AM
Cycling is Anti-Aging, But There's a Cat...
11-02-2024 11:36 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
18 posts
no avatar 2. enkei
18 posts
no avatar 3. GirishH
13 posts
no avatar 4. Flowrider
12 posts
no avatar 5. Talha
10 posts