Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the Latest Thruster® Retrogade Giveaway coming soon: 5/7


Attaching water bottle holders on old bikes
#1
Hi,

How do you attach a water bottle holder to an old bike that doesn't have the screw holes for mounting them? Thank you for any input.
  Reply
#2
You can buy adaptors that fit on the handlebar or seat tube that will allow you to attach a bottle cage to them. Check with your LBS as they should carry at least one type of adaptor.
HCFR Cycling Team
Ride Safe...Ride Hard...Ride Daily
  Reply
#3
There's a bunch of ideas on this link that you can use
http://recklesscognition.wordpress.com/2009/01/13/methods-for-attaching-water-bottle-cages-without-screws-and-bosses/
  Reply
#4
riv-nuts
Get on your bad pedalscooter and ride!
  Reply
#5
You do not want to drill holes in your frame.

There are water bottle holders that use wrap around straps. Usually found in department stores . I got mine at Target.

You can also use the plastic cable ties , used by electricians. And there are handlebar mounts too.
Never Give Up!!!
  Reply
#6
(03-25-2011, 10:52 PM)GeorgeET Wrote:  You do not want to drill holes in your frame.

There are water bottle holders that use wrap around straps. Usually found in department stores . I got mine at Target.

You can also use the plastic cable ties , used by electricians. And there are handlebar mounts too.

Ill go to the bike shop to see what they have. Tried the plastic ties, but it kept moving.
  Reply
#7
stainless steel hose clamps with a short piece of sectioned inner tube to protect the paint work great.
Nigel
  Reply
#8
(03-26-2011, 02:57 AM)nfmisso Wrote:  stainless steel hose clamps with a short piece of sectioned inner tube to protect the paint work great.

With the excellent ideas above if you are worried about the paint job using this idea you can put small pieces of inner tube between the hose clamps and frame which will also help to keep it from moving.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#9
Sounds like a good idea I'll try it thank you for all the input!
  Reply
#10
I have seen some innovative water bottles recently...

- a two bottle holder that goes under/behind the seat. You might be able to get a smaller saddlebag underneath it

- a handlebar mount (sometimes you see these on bikes with time trial handlebars)
  Reply
#11
(05-23-2011, 09:18 AM)monty3ross Wrote:  I am having a old bike so this is helpful for me.I attach a bottle holder behind the seat.

Did you read the above advice?
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
5,224
08-01-2021, 10:58 AM
Last Post: JohnWebike
 
8,832
08-14-2014, 07:00 PM
Last Post: GeorgeET
 
5,601
10-12-2012, 10:34 PM
Last Post: Bill
 
15,562
02-12-2012, 05:57 PM
Last Post: ghost
 
15,958
06-18-2010, 06:32 AM
Last Post: Bill

Forum Jump:

[-]
10 Latest Posts
Oakley lens peeling
Today 02:39 PM
1991 Bianchi Boardwalk - Selling advice
Today 01:21 PM
1995 Specialized Rockhopper FS Comp A1
Today 10:30 AM
Just Joined
Today 10:14 AM
Cycling in the Wind
Today 10:03 AM
New hip fracture, looking for some words...
Today 09:32 AM
Vilano Warning
05-06-2024 08:38 PM
Problems with new 3x7 trigger shifter (S...
05-04-2024 12:32 PM
Second RSX hydraulic brake caliper fails...
05-03-2024 02:34 AM
What tools have you bought recently?
05-02-2024 12:40 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
25 posts
no avatar 2. GirishH
19 posts
no avatar 3. enkei
19 posts
no avatar 4. Amanda_W
13 posts
no avatar 5. Nutribun
13 posts