Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Help needed for finding a replacement rim!
#1
Hi All, These are my current rims: Wheeltech TD26 by Alex Rims (can't find much info about these online). I need to replace the rear wheel as it is cracked (cracks on the rims around a few spokes)
It's a 700C disc brake rim with quick releases. What do I need to consider other than the size of the wheel when choosing a replacement? I'll likely migrate over the cassette and rotor (if need be). My knowledge of rims is limited so any help is appreciated!

Here is my bike: https://www.bikes.com/en/bikes/whistler/2015 (Must select Whistler 70 when on the site)

Thanks all!
  Reply
#2
(07-10-2019, 10:36 PM)AK1 Wrote:  Hi All, These are my current rims: Wheeltech TD26 by Alex Rims (can't find much info about these online). I need to replace the rear wheel as it is cracked (cracks on the rims around a few spokes)
It's a 700C disc brake rim with quick releases. What do I need to consider other than the size of the wheel when choosing a replacement? I'll likely migrate over the cassette and rotor (if need be). My knowledge of rims is limited so any help is appreciated!

Here is my bike: https://www.bikes.com/en/bikes/whistler/2015 (Must select Whistler 70 when on the site)

Thanks all!

hi,
in many cases handy cyclists simply swap the rim and respoke, leaving cassette (local mechanic will gladly do it for you). however, not sure if the effort is worth it considering that the current Shimano RM35 hub is nothing special, so I suggest just replacing the whole wheel - it would roughly cost almost the same.

if you want to go with simply swapping the rim, have to consider the 622 size, 32 spoke holes and the spoke holes diameter - those should be the same as the old TD26 rim, especially because you probably want to use the old tires etc.

if you want to change the whole wheel, my suggestion is that besides the size you have to have a hub compatible with the common 135mm QR or quick release axle (it's one standard, so not much to go wrong with); the hub has to have CenterLock system for disc brakes; also Shimano freehub.

your current hub: Shimano RM35
  Reply
#3
just in case you want to replace the rim on your own: https://www.bikeride.com/replace-rim/
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Wearable Fitness Trackers
Today 01:44 AM
What year is this Diamondbacks wildwood ...
Yesterday 06:07 PM
Verification method impedes site operati...
Yesterday 11:12 AM
What's the longest bike journey you've e...
Yesterday 11:09 AM
Newbie from South Florida
02-20-2026 10:25 AM
Cycle packing or learning from other lon...
02-18-2026 10:53 AM
wireless remote control turn signal..
02-14-2026 07:19 AM
How to keep your bicycle safe?
02-14-2026 05:23 AM
How do you jump?
02-12-2026 11:38 PM
New Jersey's New E-bike Law
02-09-2026 03:12 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
26 posts
no avatar 2. Jesper
13 posts
no avatar 3. Flowrider
13 posts
no avatar 4. rydabent
9 posts
no avatar 5. jacob76
8 posts