Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Help needed for finding a replacement rim!
#1
Hi All, These are my current rims: Wheeltech TD26 by Alex Rims (can't find much info about these online). I need to replace the rear wheel as it is cracked (cracks on the rims around a few spokes)
It's a 700C disc brake rim with quick releases. What do I need to consider other than the size of the wheel when choosing a replacement? I'll likely migrate over the cassette and rotor (if need be). My knowledge of rims is limited so any help is appreciated!

Here is my bike: https://www.bikes.com/en/bikes/whistler/2015 (Must select Whistler 70 when on the site)

Thanks all!
  Reply
#2
(07-10-2019, 10:36 PM)AK1 Wrote:  Hi All, These are my current rims: Wheeltech TD26 by Alex Rims (can't find much info about these online). I need to replace the rear wheel as it is cracked (cracks on the rims around a few spokes)
It's a 700C disc brake rim with quick releases. What do I need to consider other than the size of the wheel when choosing a replacement? I'll likely migrate over the cassette and rotor (if need be). My knowledge of rims is limited so any help is appreciated!

Here is my bike: https://www.bikes.com/en/bikes/whistler/2015 (Must select Whistler 70 when on the site)

Thanks all!

hi,
in many cases handy cyclists simply swap the rim and respoke, leaving cassette (local mechanic will gladly do it for you). however, not sure if the effort is worth it considering that the current Shimano RM35 hub is nothing special, so I suggest just replacing the whole wheel - it would roughly cost almost the same.

if you want to go with simply swapping the rim, have to consider the 622 size, 32 spoke holes and the spoke holes diameter - those should be the same as the old TD26 rim, especially because you probably want to use the old tires etc.

if you want to change the whole wheel, my suggestion is that besides the size you have to have a hub compatible with the common 135mm QR or quick release axle (it's one standard, so not much to go wrong with); the hub has to have CenterLock system for disc brakes; also Shimano freehub.

your current hub: Shimano RM35
  Reply
#3
just in case you want to replace the rim on your own: https://www.bikeride.com/replace-rim/
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
It took more than 700 rubber bands to br...
Today 04:10 PM
Lefty fork by Cannondale
Today 04:04 PM
What are the benefits of a dropper post ...
Today 04:02 PM
Hatch Chiles Rule!
Yesterday 02:37 PM
The great thing about trikes
Yesterday 09:51 AM
Back from the Dead
08-16-2026 05:55 AM
How do you commute on bikes in rougher a...
08-16-2026 05:52 AM
Accessories recommendations for a new co...
08-16-2026 05:49 AM
6061 vs 7005 aluminium
08-15-2026 09:44 AM
Best road bike tyres?
08-14-2026 10:17 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
29 posts
no avatar 2. GirishH
14 posts
no avatar 3. Mr. Beanz
12 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. froze
10 posts