Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Hayes Mechanical Front Disc alignment
#1
I have Hayes MX3 Mechanical Disc Brakes front & back, and had to remove front wheel and when I reinstalled the front wheel I am having difficulty in adjusting the disc with equal spacing between the outside & inside brake pads. Each time I tighten the quick release I have the outer pad dragging as the wheel is spun through on rotation. Is there a trick to setting & keeping an even space between the pads & disc while tightening the quick release?

  Reply
#2
Make sure your axle is firmly mounted in your fork dropouts, and then tighten the <a href="http://bikeride.com/remove-install-wheels/">quick release lever</a>. Once this is done you may have to adjust the pad position. Is there a side-to-side adjustment screw on your brake calipers?

  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Safest bike helmets
Today 10:13 AM
Braking: What is your GoTo braking metho...
Today 09:54 AM
Tour de FRANCE 2025
Today 08:57 AM
Tubeless vs. tubes: What are the pros an...
Today 02:23 AM
Pros & Cons of presta valve vs schrader ...
Yesterday 11:58 AM
Raleigh Sports Serial Number
07-09-2025 11:10 AM
The great thing about trikes
07-09-2025 10:12 AM
Full Moon Ride - Sunshine Coast
07-08-2025 10:46 PM
Continued learnings from bikepacking
07-08-2025 10:40 PM
What are the pros and cons of using a 26...
07-08-2025 10:35 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
23 posts
no avatar 2. GirishH
22 posts
no avatar 3. meamoantonio
18 posts
no avatar 4. enkei
15 posts
no avatar 5. Jesper
14 posts