Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the September Giveaway to Win the Luckeep X1 Pro ebike


Front Derailleur Issues
#1
Hi, I'm new here . . . but hope to become competent enough someday to give back--or maybe not, gotta know what you don't know.

I am a total hack, trying to get my old mountain bike up and running. I put new tires on it, new chain, and new shifters, and am now trying to address what I think is a front derailleur issue. I tried to remount it and align it but I am having a really hard time after following about five different online tutorials.

1. From the pics, can anyone let me know if it is bent?

2. If so, can you recommend a suitable replacement. The clamp says 34.9 and the bike is 7 speeds.

3. based on pics, any suggestions for tuning?

Thanks a lot!
  Reply
#2
yes it is bent,right here
(03-26-2012, 05:54 PM)painkiller Wrote:  yes it is bent,right here
What kind of shifters do you have? top mount thumb or sti
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
thanks a lot for the quick feedback. Can I remove the derail and bend it out with channel locks? or is there something better for the job?

I recently installed SRAM comp 3 grip shifters to replace the grip shifters that were on the bike. Pics attached. are these compatible?

[attachment=3116]

Now that know it is bent, it makes sense that I could not adjust by following the tutorials.

In your opinion, should I try to open it back up, or just replace? The part is old, for sure, but I'd love to be able to fix it.

(03-26-2012, 05:54 PM)painkiller Wrote:  yes it is bent,right here
(03-26-2012, 05:54 PM)painkiller Wrote:  yes it is bent,right here
What kind of shifters do you have? top mount thumb or sti
  Reply
#4
The curve of the outer plate of the derailleur should follow the curve of the chainrings, so I think this is pretty badly bent. You may be able to straighten it out, but I doubt you'll ever get it quite right. These have a lot of complex curves in them. If you don't have something to compare it to, it may be tricky to get it right. But nothing to lose by trying.

Buying new...I THINK you can use either SRAM or Shimano front derailleurs with SRAM shifters (not always true of the rear). You need one for a triple crank, with a clamp diameter of 34.9mm, and a "bottom pull" (meaning the cable goes down from the derailleur). Should be a lot of choices.
  Reply
#5
I would try to fix it first. That part is free just your time.
the outer front part of the cage should be straight and parallel to your chainring. the rear outer part of the cage kicks out a bit more than the front and should be parallel to the chainring also.
If your new gripshift has incremental indents between the numbers on your front shifter you should be able to repair easily, if it is one click one shift you will have to fine tune your adjustments more but do able.
front derailleurs such as what you have can be found on ebay. If you have to go that route go for your clamp size and bottom pull and good used will be cheaper than a nos (new old stock).
expect to pay around 20 to 30 for a used and 30 to 60 us dollars for NOS and you get a decent deal. I have a lot of experience with high end vintage shimano parts such as these so if you find a nos part cheaper than what I said you have done well. A DX or LX will also
work. Good luck with your resto and would like to see some pics of the whole bike sometime
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#6
Thanks to everyone who replied. I really appreciate it. I will try to bend it out and if that doesn't work, replace it.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Why Do My Cycling Stats Feel Inaccurate ...
Today 12:37 AM
Shimano Deore cassette with SRAM Apex me...
Today 12:35 AM
Change comes hard in the cycling communi...
Today 12:29 AM
Pogacar wins UCI Road Bike World Champio...
Today 12:26 AM
How to keep your bicycle safe?
Today 12:23 AM
Northeast of India or Myanmar rides
Yesterday 02:15 PM
1 New Knobbly Tire... Front or Back?
10-01-2024 08:06 PM
MTB Night Lighting - What are recommenda...
10-01-2024 07:59 PM
COLNAGO SUPER (unknown year)
09-29-2024 07:29 PM
Any other Bridgestone Picnica OneTouch r...
09-28-2024 07:30 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
20 posts
no avatar 2. Flowrider
17 posts
no avatar 3. GirishH
17 posts
no avatar 4. rydabent
15 posts
no avatar 5. meamoantonio
12 posts