Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Can you identify this front derailluer?
#1
Hello,

New here.

I'm trying to clean up a neglected bike and need to replace the front derailleur. It's a cheap bike and will just be ridden occasionally on pavement and rarely will change gears but I would still like it to function as intended.

There are 3 sprockets in the front and a derailleur with the name falcon on it.

Where is the recommended place to get a replacement? If the price difference is not very much, is there something better to replace it with?

Here are some pics:

<img src=http://i301.photobucket.com/albums/nn41/rastoma/2011-11-22135438.jpg> <img src=http://i301.photobucket.com/albums/nn41/rastoma/2011-11-22135453.jpg> <img src=http://i301.photobucket.com/albums/nn41/rastoma/2011-11-22135509.jpg>
  Reply
#2
It is a Falcon - a company that make many low end bike parts.

Looks like top pull; this one will work well:
http://www.amazon.com/Clamp--31-8mm-Pull-Front-Derailleur/dp/B005V4R684/
Nigel
  Reply
#3
Thank you Nigel.

I was afraid this place was only for higher end bicycles and wouldn't get much help. I'm glad I was wrong Smile I appreciate your time.
  Reply
#4
Hi again Nigel (or whoever),

The company that has that cheap derailleur also lists a similar one that specifically mentions it's adjustable for 2 or 3 chain rings.

Since there are 3 rings on this bike I'm working on, does it matter? They look the same to me but have different model numbers:

http://www.amazon.com/Clamp--31-8mm-Pull-Front-Derailleur/dp/B003JO9QC2
  Reply
#5
You do need one for 3 chainrings, but it looks like either would be fine.
Note that you should measure the diameter of the tube that the derailleur clamps on to on your bike and make sure it is the same size as the "clamp diameter" of the new derailleur.
  Reply
#6
(11-22-2011, 08:08 PM)DaveM Wrote:  You do need one for 3 chainrings, but it looks like either would be fine.
Note that you should measure the diameter of the tube that the derailleur clamps on to on your bike and make sure it is the same size as the "clamp diameter" of the new derailleur.
+1
Nigel
  Reply
#7
Excellent. Thank you again, to both of you.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Are you mainly into Mountain Biking, Roa...
Yesterday 11:08 AM
Are 26" really dying out?
Yesterday 11:02 AM
Wanted | Magura Louse or Julie rear
Yesterday 04:03 AM
Hatch Chiles Rule!
11-09-2026 04:56 PM
Should eBikers have to get an eBike lice...
11-09-2026 05:21 AM
How Bad Are E-bikes By You?
11-08-2026 10:29 PM
Shortness of breath.
11-08-2026 09:56 PM
Hello All
11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does...
11-06-2026 02:48 AM
Chain skips under heavy load when pedall...
11-06-2026 02:44 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
21 posts
no avatar 2. meamoantonio
11 posts
no avatar 3. ReapThaWhirlwind
11 posts
no avatar 4. GirishH
10 posts
no avatar 5. Clark
6 posts