Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Chain Removal (Does it have a master link ?)
#1
Greetings.

I checked my chain to see if there is a master link and there is a link that is
different from the others but it doesn't seem to open (it doesn't have an open end
safety pin like the one in the video).

Can you tell what kind of link it is from the photo ?

Thank you for your time.
  Reply
#2
That's a Shimano chain so maybe one of these:-

http://techdocs.shimano.com/media/techdocs/content/cycle/SI/Dura-Ace/SI_0074A_001/SI-0074A-001_En_v1_m56577569830655402.pdf
Ride hard or ride home alone!
  Reply
#3
(06-30-2010, 01:53 PM)cyclerUK Wrote:  That's a Shimano chain so maybe one of these:-

http://techdocs.shimano.com/media/techdocs/content/cycle/SI/Dura-Ace/SI_0074A_001/SI-0074A-001_En_v1_m56577569830655402.pdf

I read this pdf in the other post about shimano chain but i didn't know my chain is
shimano. I will try it.

Thank you very much for replying.

Edit: My link doesn't seem to have a slide pin. In the pdf both plates of the master link
are shown as hollow, while mine is not hollow on the one side.
I checked the shimano site and found http://techdocs.shimano.com/media/techdocs/content/cycle/SI/Chain/SI_0034B_001/SM-UG51/SI_0034B_13_v1_m56577569830604498.pdf
This is labeled "CN-UG51 5/6/7-Speed UG Chain" while mine is 8 speed but it looks
like mine.
  Reply
#4
This looks like a variation of this;
http://www.tayachain.com/
and is removed by flexing the link towards you to free the ends of the pins from the keyhole slot, they are not re-usable.
  Reply
#5
Some where on the chain should be the type number of the chain. Not on every link but on some.
Swap the link for KMC or Sram etc.
If you can't remove it then you could cut it off?
Ride hard or ride home alone!
  Reply
#6
(06-30-2010, 04:54 PM)cyclerUK Wrote:  Some where on the chain should be the type number of the chain. Not on every link but on some.
Swap the link for KMC or Sram etc.
If you can't remove it then you could cut it off?

Yes, you are correct. I could read "narrow" on the one end and "Z" in the middle but
there were markings in the other end too which i couldn't read. With the help of a led,
i read it. It says "KMC". It is even on every link. So, according to the KMC website,
it is a KMC Z8 chain.

Since the master link is not reusable, yes i can cut it easily and buy a reusable one.

Thank you again for replying.
  Reply
#7
(07-01-2010, 04:02 AM)noulis4 Wrote:  
(06-30-2010, 04:54 PM)cyclerUK Wrote:  Some where on the chain should be the type number of the chain. Not on every link but on some.
Swap the link for KMC or Sram etc.
If you can't remove it then you could cut it off?

Yes, you are correct. I could read "narrow" on the one end and "Z" in the middle but
there were markings in the other end too which i couldn't read. With the help of a led,
i read it. It says "KMC". It is even on every link. So, according to the KMC website,
it is a KMC Z8 chain.

Since the master link is not reusable, yes i can cut it easily and buy a reusable one.

Thank you again for replying.

Well you learn something everyday. I "thought" it was only Shimano chains that had "narrow" etched on them.
I have mainly used Shimano chains for the last 15 years and have only recently bought KMC. (which I am pleased with) . I once bought a Sram chain but took it off my mountain bike as the gear change was not as good as the Shimano. Mind that was a few years ago.
Ride hard or ride home alone!
  Reply
#8
For my own knowledge isn't there another company that sells a chain with a Z on it like the one he shows?
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
4,702
10-26-2020, 08:28 PM
Last Post: stanS
 
10,672
08-09-2017, 02:19 PM
Last Post: Desmond
 
12,971
12-04-2015, 09:41 PM
Last Post: GeorgeET
 
12,557
06-30-2015, 02:49 PM
Last Post: Painkiller
 
12,623
03-11-2015, 01:21 AM
Last Post: eastman
 
14,355
02-13-2015, 01:49 PM
Last Post: nfmisso
 
SpeedBikeNut32
10,766
01-20-2015, 10:02 PM
Last Post: SpeedBikeNut32
 
14,513
01-13-2015, 05:28 AM
Last Post: benj
 
13,845
11-11-2014, 12:16 AM
Last Post: cny-man

Forum Jump:

[-]
10 Latest Posts
Giant reporting profits are 60% down
Today 10:50 AM
Thoughts on tariff effects on the cyclin...
Today 10:30 AM
braking by reversing the pedals
Today 09:00 AM
Post-Ride Nutrition
04-03-2025 02:06 AM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
04-03-2025 02:03 AM
Pre Ride Food Intake
04-03-2025 12:14 AM
SAVA Explorer 6061?
04-02-2025 03:31 PM
Zwift v Spin v Wahoo
04-01-2025 05:59 PM
Have you Ever Tried an Electric Bike?
04-01-2025 05:07 PM
Good Morning from SW Ohio
04-01-2025 07:32 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. Flowrider
18 posts
no avatar 3. Jake1
14 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. SPINMAN
9 posts