Home Made Chain Whip

tino · 02-23-2010, 07:31 PM

this is my home made chain whip

Alex Ramon · 02-23-2010, 07:56 PM

Great job, looks perfect. Nice and simple. If you have time maybe you could let us know how you made it? Keep it up!

tino · 02-23-2010, 08:21 PM

Thanks Alex .
i Used one 11'' inch long x 1'' inch piece a flat metal so i shave whit a dewalt grinder 2 1/2'' inch x 1/2'' inch and i drill the first hole and the second 2 1/2 inch a part i used 5/32 drill bit for the holes i used a old chain 5 chain links and 14 chain links for the second section

Bill · 02-23-2010, 11:08 PM

Thanks Tino,
I have seen other homemade one but I like this one better.

Surly LHT · 02-23-2010, 11:12 PM

That does look nice. Nice work !

surreypete · 03-23-2010, 09:55 AM

Great job tino.

I might have a go at making one of those up myself when I get my old chain off the bike

What thickness is the metal bar you used?

tino · 03-23-2010, 10:18 AM

hi surreypete i used 1/8 thickness metal bar

10 Latest Posts
Should eBikers have to get an eBike lice... Yesterday 07:15 PM
How Bad Are E-bikes By You? Yesterday 07:11 PM
Our new review format – we'd like your f... Yesterday 06:59 AM
Which one should I pick? 10-21-2026 08:09 PM
Chain skips under heavy load when pedall... 10-21-2026 07:32 PM
New rider 10-21-2026 07:07 PM
Are 26" really dying out? 10-18-2026 07:38 PM
Using ChatGPT for training 10-18-2026 07:32 PM
2026 Garmin Edge 1050 - warranty 10-18-2026 09:34 AM
Catastrophic bicycle failures 10-16-2026 01:36 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom