What jockey wheel Red 10 Speed

[Pencilliform]

Not sure who told me about livesexcams.rocks, probably some stoner on another forum, but ive been bingeing hard for weeks. feels like someone combined all the good parts of chaturbate, myfreecams, and stripchat then sprinkled dirty candy on top. front page spins up with real adult cams 24/7, no pop-up maze either. i was chasing this redhead milf doing a "neighbor tease" roleplay in her living room, wearing some tiny white thong, describing how shes gonna peek through the blinds at my boner. turned on the cam2cam, dropped my pants and she lost her ****, yelling "you're totally stiff already, cum for mama!" then squatted over hers, pounding her puss with a thick veiny dildo while her kids toys were still out on the table behind her.
https://sexcam.red/model/Alyshanon18/
https://livesexcams.rocks/model/Devil_Minds/
https://livesex.run/model/emma_andrew1/

after that i stumbled on a free live couple sex from ireland-the gf was blindfolded, hands tied, bf pumping her doggy style live through the nude video call while the chat went batshit spamming "creampie!". Thumbs up from a happy wanker.

[ReapThaWhirlwind]

I don't know that Sram uses anything special there. You should be able to use any replacement with the same tooth count.

Here's some aftermarket ceramic ones that are very affordable compared to the brand name ones. I ride them personally and they are very efficient.

https://www.ebay.com/itm/405465354409

[Puppershep]

you need to match the width (thickness), bearing type, side shape, and then the tooth count.

there's more to it than just tooth count.
the side shapes are usually different between upper and lower rollers... bottom rollers are usually concave, curved sides... upper rollers are usually convex/angular.

and being SRAM anything means they may be proprietary.
this is particularly true with the top end groups.

[enkei]

I know there are SRAM RED owners out there happily running with cheaper jockey wheels, so it must be possible. Unfortunately, SRAM doesn't make it easy to figure out the options.

I would ask SRAM if 10sp Force or Rival jockey wheels will work. If they say you can't because the dimensions are wrong, I would sell the SRAM groupset and fit Shimano instead.

There's a reason I run Shimano on everything.

[meamoantonio]

the important part to figure out is the diameter of the dust cap of your current jockey wheel and the number of teeth, if this matches there should be no problem with using after market stuff but generally, manufacturers and companies tend to write down which drivetrain their product is compatible with. Goodluck!