New: Take part in the April 2020 Giveaway for a brand new GIORDANO™ bicycle

Welcome guest! Register or sign in to participate in the cycling discussions.


Started my 10 speed to 3 speed hub conversion from 27" to 26" wheels.
#1
The rear wheels seems to fit fine. The spacing was perfect. Both wheels are off of  different Raleighs. The  rear brakes need changing. The bent 27" forks are being replaced with 26" forks. I serviced the bottom bracket and put a single chain drive and new peddles on as well. I think it will work but until it's finished, you never know for sure. There will be 4 or 5 pics. Will change the drop bars to flat bars, put a comfort seat on and see where it goes from there. If anyone has any advice I am interested in hearing it.
[Image: IMG_00002766_zpsxepe00r0.jpg~original]
[Image: IMG_00002765_zpshshxfud6.jpg~original]
[Image: IMG_00002767_zpsjvdu92ke.jpg~original]
[Image: IMG_00002769_zpskuy1gwqu.jpg~original]
[Image: IMG_00002770_zpsiecuscvs.jpg~original]
"Where ever we go, there we are"
  Reply


Possibly Related Threads...

Forum Jump:

[-]
Ad

[-]
10 Latest Posts
One expensive lock vs two cheaper locks?
Today 06:22 PM
Gear shift is stuck!
Today 05:37 PM
Wheels stolen off my Nishiki Performance...
Today 10:01 AM
Giordano Bicycles | April 2020
Today 12:38 AM
New Member Intro
Today 12:12 AM
Wheels too big for frame?
Yesterday 10:56 PM
Hybrid Bike Recommendations?
Yesterday 04:46 PM
I am looking to buy a bike but I know no...
Yesterday 07:51 AM
New (soon-to-be) daily commuter
Yesterday 06:28 AM
Hello Im Jorge From Tokyo
Yesterday 06:11 AM

[-]
Ad

[-]
Top 5 Posters This Month
no avatar 1. G_M
17 posts
no avatar 2. Jesper
14 posts
no avatar 3. CharleyFarley
9 posts
no avatar 4. JoJoJo
8 posts
no avatar 5. Nikko
7 posts