(07-19-2008, 06:17 PM)Alex Ramon Wrote: You'll have to get a different set of hubs if you want to use the quick release.
That's not true. You can usually buy a hollow axle with the same diameter and thread count as the solid axle. Just thread off the cones, locknuts, etc., and thread onto the new hollow axle. Done.
The best way to figure out which Axle you need is to go to Wheel's Manufacturing (
http://wheelsmfg.com/content/view/469/32/ ) and look at what's available.
- 9, 9.5, or 10mm diameter?
- 26 threads per inch? Or, 1 thread per mm (which is 25.4 threads per inch)?
- Measure the inner the drop out distance, and add 4-6 mm to accommodate for the axle extending *into* the drop out.
I can figure out axle diameter and thread count. 9.5mm is 3/8". If an axle is thinner or thicker, then it's 9 or 10mm. Likewise, it's not hard to count 26 or 52 threads. Then measure. If it comes out to less than 1" (or 2" if I counted 52), it's the metric thread count.
You can always take an axle nut to your local bike shop and ask them what it is.
The length is the easiest to figure out because the axles come in common lengths. The available lengths help guide you to the correct drop-out measurement.
I've done this to two Walmart bikes that came with solid rear axles. The hollow axle cost me about $12. I got a free skewer from my local bike shop's spare parts box.
-------
WARNING: As someone noted in another thread, a person needs to understand how QR wheels are different. Such as theft, and especially the risks of not tightening sufficiently. If the front drop-out doesn't have the "lawyer lips" (that come with most bikes outfitted with QR axle) the wheel could pop out, and your forks dig into the ground (leaving the rider with major dental work). If the rear dropout faces forward, it could be possible to pull the wheel forward under load, causing it to jam against the frame, throwing the rider off the bike.
So, if changing a nutted axle to QR, be sure to clamp the lever extra, extra tight. (And be aware of how much easier it makes to steal the wheel.).