Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Creative bike mechanics (freehub) [Solved]
#1
Just wow, this calls for the bicycle repair photo of the month prize! Big Grin
As this bike rider himself explained, his friend's freehub turned fixie during the ride, and they used such creative tool to get the 16mm nut out of the hub.

   
  Reply
#2
Mercy, ha
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
(08-04-2019, 07:39 AM)Zviedrs Wrote:  Just wow, this calls for the bicycle repair photo of the month prize! Big Grin
As this bike rider himself explained, his friend's freehub turned fixie during the ride, and they used such creative tool to get the 16mm nut out of the hub.
I recently replaced the freehub on my Specialized Fatboy. It required a 12mm hex wrench, and hardware stores don't sell anything bigger than 10mm, so I had to order it, online.

Trying to turn the wrench with a piece of pipe, didn't work. Probably needed a longer pipe but I was afraid of doing damage to something. So I put the wrench in a vise and lowered the wheel onto it. Had to jerk it counterclockwise a few times until it snapped free. I don't know why they tighten the nut so much. When I put it back I tightened it but not so hard that it was almost impossible to undo. After tightening it, I was able to loosen it again, with the aid of the short piece of pipe. Ridden it another 1,000 miles since then, and no problems.

My freehub hadn't turned fixie but while wheeling the bike out, one morning, I became aware that the pedals were turning. I expect that when pushing the bike backward, but not when pushing it forward. I had to think about it because I never noticed the pedals turning, before, and I ride it every morning.

I removed the freehub and it seemed fine. Screwing it back onto the hub, and it was a little stiff if I tightened the lock ring properly. By loosening the lock ring so that it was barely holding, the freehub turned freely. Apparently over 5,000 miles had put a bit of wear on it. Got the new freehub, tightened it properly, and the pedals no longer turn while pushing the bike forward.

I'm thinking I might have suffered a fixie, too, before long.
If I knew how to ride a bike properly, I'd do it every time.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Hello from NW Ohio
08-22-2026 10:27 PM
I Tried Riding Like the Pros
08-22-2026 07:10 PM
Shimano RevoShift upgrade
08-22-2026 06:14 PM
Specialized bicycle post issue
08-22-2026 06:12 PM
Sram Transmission derailleur possibly de...
08-22-2026 04:34 PM
Philodo H8 5000W
08-22-2026 04:28 PM
Chain skips under heavy load when pedall...
08-22-2026 04:16 PM
It took more than 700 rubber bands to br...
08-22-2026 04:13 PM
Hello from Jasleen – getting more into c...
08-22-2026 01:55 AM
How do you commute on bikes in rougher a...
08-22-2026 01:52 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
27 posts
no avatar 2. GirishH
17 posts
no avatar 3. meamoantonio
11 posts
no avatar 4. Mr. Beanz
11 posts
no avatar 5. Sidewinder
10 posts