Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the October Giveaway for the Haven Bicycle Co. beach cruiser


Single-speed to 8x geared conversion shifter problem
#1
Hi all
new to the site; I'm sure this is something that has come up before, but I'm currently trying to do a single-speed to 8x geared conversion, with a downtube shifter.
I've got the dropdown hanger for the rear derailleur bolted into the drop-out (after reading advice from this site...thanks!), and the rear derailleur mounted.

The chain runs through the derailleur and smallest gear (and the front cassette) fine, and I've attached the cable into the derailleur OK. The derailleur adjusts position when I use the shifter, but the chain doesn't move with it. I can manually move the chain onto the biggest sprocket, but not currently using the shifter.  I've tried tightening the cable, but am not 100% sure what the starting position of the shifter should be (I've not found much on Youtube for this) and have double-checked I've routed the cable through the shifter properly (using parktool guide).  I'm officially stumped.

Does that make any sense? If so, does anyone have any advice? I can provide a photo if it helps. Any/ all suggestions welcome!

Cheers
T
  Reply
#2
(01-16-2016, 07:39 AM)Tomtebi Wrote:  Hi all
new to the site; I'm sure this is something that has come up before, but I'm currently trying to do a single-speed to 8x geared conversion, with a downtube shifter.
I've got the dropdown hanger for the rear derailleur bolted into the drop-out (after reading advice from this site...thanks!), and the rear derailleur mounted.

The chain runs through the derailleur and smallest gear (and the front cassette) fine, and I've attached the cable into the derailleur OK. The derailleur adjusts position when I use the shifter, but the chain doesn't move with it. I can manually move the chain onto the biggest sprocket, but not currently using the shifter.  I've tried tightening the cable, but am not 100% sure what the starting position of the shifter should be (I've not found much on Youtube for this) and have double-checked I've routed the cable through the shifter properly (using parktool guide).  I'm officially stumped.

Does that make any sense? If so, does anyone have any advice? I can provide a photo if it helps. Any/ all suggestions welcome!

Cheers
T

I do my own work, I am no expert, but I have ideas. Are you using a 8 speed chain? A single speed chain is wider than an 8 speed chain and would probably not shift.
Is the chain the correct length? The Park Tool site has methods by which you can estimate if your chain length is long enough. Duane
  Reply
#3
(01-16-2016, 10:05 AM)Old Duane Wrote:  
(01-16-2016, 07:39 AM)Tomtebi Wrote:  Hi all
new to the site; I'm sure this is something that has come up before, but I'm currently trying to do a single-speed to 8x geared conversion, with a downtube shifter.
I've got the dropdown hanger for the rear derailleur bolted into the drop-out (after reading advice from this site...thanks!), and the rear derailleur mounted.

The chain runs through the derailleur and smallest gear (and the front cassette) fine, and I've attached the cable into the derailleur OK. The derailleur adjusts position when I use the shifter, but the chain doesn't move with it. I can manually move the chain onto the biggest sprocket, but not currently using the shifter.  I've tried tightening the cable, but am not 100% sure what the starting position of the shifter should be (I've not found much on Youtube for this) and have double-checked I've routed the cable through the shifter properly (using parktool guide).  I'm officially stumped.

Does that make any sense? If so, does anyone have any advice? I can provide a photo if it helps. Any/ all suggestions welcome!

Cheers
T

I do my own work, I am no expert, but I have ideas. Are you using a 8 speed chain? A single speed chain is wider than an 8 speed chain and would probably not shift.
Is the chain the correct length? The Park Tool site has methods by which you can estimate if your chain length is long enough.  Duane

Hi Duane
I am using an 8 speed chain, and I'm fairly sure it's the right length, but i'll double check. Thanks for the suggestion

T
  Reply
#4
(01-16-2016, 10:35 AM)Tomtebi Wrote:  
(01-16-2016, 10:05 AM)Old Duane Wrote:  
(01-16-2016, 07:39 AM)Tomtebi Wrote:  Hi all
new to the site; I'm sure this is something that has come up before, but I'm currently trying to do a single-speed to 8x geared conversion, with a downtube shifter.
I've got the dropdown hanger for the rear derailleur bolted into the drop-out (after reading advice from this site...thanks!), and the rear derailleur mounted.

The chain runs through the derailleur and smallest gear (and the front cassette) fine, and I've attached the cable into the derailleur OK. The derailleur adjusts position when I use the shifter, but the chain doesn't move with it. I can manually move the chain onto the biggest sprocket, but not currently using the shifter.  I've tried tightening the cable, but am not 100% sure what the starting position of the shifter should be (I've not found much on Youtube for this) and have double-checked I've routed the cable through the shifter properly (using parktool guide).  I'm officially stumped.

Does that make any sense? If so, does anyone have any advice? I can provide a photo if it helps. Any/ all suggestions welcome!

Cheers
T

I do my own work, I am no expert, but I have ideas. Are you using a 8 speed chain? A single speed chain is wider than an 8 speed chain and would probably not shift.
Is the chain the correct length? The Park Tool site has methods by which you can estimate if your chain length is long enough.  Duane

Hi Duane
I am using an 8 speed chain, and I'm fairly sure it's the right length, but i'll double check.  Thanks for the suggestion

T

Hopefully one of the Pros will be able to pin down the problem when they notice your post. However, the derailleur cog should be directly in line with each gear. Here is an excellent website that can help with many questions: http://sheldonbrown.com/derailer-adjustment.html Best Wishes, Duane Smile
  Reply
#5
Thanks Duane Smile

(01-16-2016, 11:38 AM)Old Duane Wrote:  
(01-16-2016, 10:35 AM)Tomtebi Wrote:  
(01-16-2016, 10:05 AM)Old Duane Wrote:  
(01-16-2016, 07:39 AM)Tomtebi Wrote:  Hi all
new to the site; I'm sure this is something that has come up before, but I'm currently trying to do a single-speed to 8x geared conversion, with a downtube shifter.
I've got the dropdown hanger for the rear derailleur bolted into the drop-out (after reading advice from this site...thanks!), and the rear derailleur mounted.

The chain runs through the derailleur and smallest gear (and the front cassette) fine, and I've attached the cable into the derailleur OK. The derailleur adjusts position when I use the shifter, but the chain doesn't move with it. I can manually move the chain onto the biggest sprocket, but not currently using the shifter.  I've tried tightening the cable, but am not 100% sure what the starting position of the shifter should be (I've not found much on Youtube for this) and have double-checked I've routed the cable through the shifter properly (using parktool guide).  I'm officially stumped.

Does that make any sense? If so, does anyone have any advice? I can provide a photo if it helps. Any/ all suggestions welcome!

Cheers
T

I do my own work, I am no expert, but I have ideas. Are you using a 8 speed chain? A single speed chain is wider than an 8 speed chain and would probably not shift.
Is the chain the correct length? The Park Tool site has methods by which you can estimate if your chain length is long enough.  Duane

Hi Duane
I am using an 8 speed chain, and I'm fairly sure it's the right length, but i'll double check.  Thanks for the suggestion

T

Hopefully one of the Pros will be able to pin down the problem when they notice your post. However, the derailleur cog should be directly in line with each gear. Here is an excellent website that can help with many questions: http://sheldonbrown.com/derailer-adjustment.html    Best Wishes, Duane Smile
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
536
08-02-2021, 07:23 AM
Last Post: Blank.Toogii
 
1,428
06-02-2021, 12:02 PM
Last Post: iemand85
 
2,013
04-21-2019, 10:41 PM
Last Post: peter bill
 
13,433
10-05-2017, 10:28 PM
Last Post: kazz
 
7,812
03-01-2016, 04:47 AM
Last Post: dude

Forum Jump:

[-]
10 Latest Posts
[Sponsored] Souke Sports Cycling Apparel...
Yesterday 10:21 PM
Want to convert my 2012 salsa Fargo 2 to...
Yesterday 12:51 PM
What was your first bicycle?
10-18-2021 03:42 PM
WD40 on chain?
10-18-2021 07:29 AM
VINTAGE DERAILLEURS: Campagnolo 50s-80s
10-18-2021 02:37 AM
What's your No.1 concern when you purcha...
10-17-2021 09:18 PM
Chain skips under heavy load when pedall...
10-17-2021 06:18 PM
Gears changing by themselves
10-17-2021 06:05 PM
Bike evaluation
10-16-2021 02:06 AM
V Brakes just won’t adjust properly
10-16-2021 12:19 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Souke Sports
28 posts
no avatar 2. Criminal
11 posts
no avatar 3. Zviedrs
9 posts
no avatar 4. JoJoJo
9 posts
no avatar 5. ReapThaWhirlwind
9 posts