Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the May's Giveaway: Win the LIVALL PikaBoost 2 E-bike Conversion Kit


Single-speed to 8x geared conversion shifter problem
#1
Hi all
new to the site; I'm sure this is something that has come up before, but I'm currently trying to do a single-speed to 8x geared conversion, with a downtube shifter.
I've got the dropdown hanger for the rear derailleur bolted into the drop-out (after reading advice from this site...thanks!), and the rear derailleur mounted.

The chain runs through the derailleur and smallest gear (and the front cassette) fine, and I've attached the cable into the derailleur OK. The derailleur adjusts position when I use the shifter, but the chain doesn't move with it. I can manually move the chain onto the biggest sprocket, but not currently using the shifter.  I've tried tightening the cable, but am not 100% sure what the starting position of the shifter should be (I've not found much on Youtube for this) and have double-checked I've routed the cable through the shifter properly (using parktool guide).  I'm officially stumped.

Does that make any sense? If so, does anyone have any advice? I can provide a photo if it helps. Any/ all suggestions welcome!

Cheers
T
  Reply
#2
(01-16-2016, 07:39 AM)Tomtebi Wrote:  Hi all
new to the site; I'm sure this is something that has come up before, but I'm currently trying to do a single-speed to 8x geared conversion, with a downtube shifter.
I've got the dropdown hanger for the rear derailleur bolted into the drop-out (after reading advice from this site...thanks!), and the rear derailleur mounted.

The chain runs through the derailleur and smallest gear (and the front cassette) fine, and I've attached the cable into the derailleur OK. The derailleur adjusts position when I use the shifter, but the chain doesn't move with it. I can manually move the chain onto the biggest sprocket, but not currently using the shifter.  I've tried tightening the cable, but am not 100% sure what the starting position of the shifter should be (I've not found much on Youtube for this) and have double-checked I've routed the cable through the shifter properly (using parktool guide).  I'm officially stumped.

Does that make any sense? If so, does anyone have any advice? I can provide a photo if it helps. Any/ all suggestions welcome!

Cheers
T

I do my own work, I am no expert, but I have ideas. Are you using a 8 speed chain? A single speed chain is wider than an 8 speed chain and would probably not shift.
Is the chain the correct length? The Park Tool site has methods by which you can estimate if your chain length is long enough. Duane
  Reply
#3
(01-16-2016, 10:05 AM)Old Duane Wrote:  
(01-16-2016, 07:39 AM)Tomtebi Wrote:  Hi all
new to the site; I'm sure this is something that has come up before, but I'm currently trying to do a single-speed to 8x geared conversion, with a downtube shifter.
I've got the dropdown hanger for the rear derailleur bolted into the drop-out (after reading advice from this site...thanks!), and the rear derailleur mounted.

The chain runs through the derailleur and smallest gear (and the front cassette) fine, and I've attached the cable into the derailleur OK. The derailleur adjusts position when I use the shifter, but the chain doesn't move with it. I can manually move the chain onto the biggest sprocket, but not currently using the shifter.  I've tried tightening the cable, but am not 100% sure what the starting position of the shifter should be (I've not found much on Youtube for this) and have double-checked I've routed the cable through the shifter properly (using parktool guide).  I'm officially stumped.

Does that make any sense? If so, does anyone have any advice? I can provide a photo if it helps. Any/ all suggestions welcome!

Cheers
T

I do my own work, I am no expert, but I have ideas. Are you using a 8 speed chain? A single speed chain is wider than an 8 speed chain and would probably not shift.
Is the chain the correct length? The Park Tool site has methods by which you can estimate if your chain length is long enough.  Duane

Hi Duane
I am using an 8 speed chain, and I'm fairly sure it's the right length, but i'll double check. Thanks for the suggestion

T
  Reply
#4
(01-16-2016, 10:35 AM)Tomtebi Wrote:  
(01-16-2016, 10:05 AM)Old Duane Wrote:  
(01-16-2016, 07:39 AM)Tomtebi Wrote:  Hi all
new to the site; I'm sure this is something that has come up before, but I'm currently trying to do a single-speed to 8x geared conversion, with a downtube shifter.
I've got the dropdown hanger for the rear derailleur bolted into the drop-out (after reading advice from this site...thanks!), and the rear derailleur mounted.

The chain runs through the derailleur and smallest gear (and the front cassette) fine, and I've attached the cable into the derailleur OK. The derailleur adjusts position when I use the shifter, but the chain doesn't move with it. I can manually move the chain onto the biggest sprocket, but not currently using the shifter.  I've tried tightening the cable, but am not 100% sure what the starting position of the shifter should be (I've not found much on Youtube for this) and have double-checked I've routed the cable through the shifter properly (using parktool guide).  I'm officially stumped.

Does that make any sense? If so, does anyone have any advice? I can provide a photo if it helps. Any/ all suggestions welcome!

Cheers
T

I do my own work, I am no expert, but I have ideas. Are you using a 8 speed chain? A single speed chain is wider than an 8 speed chain and would probably not shift.
Is the chain the correct length? The Park Tool site has methods by which you can estimate if your chain length is long enough.  Duane

Hi Duane
I am using an 8 speed chain, and I'm fairly sure it's the right length, but i'll double check.  Thanks for the suggestion

T

Hopefully one of the Pros will be able to pin down the problem when they notice your post. However, the derailleur cog should be directly in line with each gear. Here is an excellent website that can help with many questions: http://sheldonbrown.com/derailer-adjustment.html Best Wishes, Duane Smile
  Reply
#5
Thanks Duane Smile

(01-16-2016, 11:38 AM)Old Duane Wrote:  
(01-16-2016, 10:35 AM)Tomtebi Wrote:  
(01-16-2016, 10:05 AM)Old Duane Wrote:  
(01-16-2016, 07:39 AM)Tomtebi Wrote:  Hi all
new to the site; I'm sure this is something that has come up before, but I'm currently trying to do a single-speed to 8x geared conversion, with a downtube shifter.
I've got the dropdown hanger for the rear derailleur bolted into the drop-out (after reading advice from this site...thanks!), and the rear derailleur mounted.

The chain runs through the derailleur and smallest gear (and the front cassette) fine, and I've attached the cable into the derailleur OK. The derailleur adjusts position when I use the shifter, but the chain doesn't move with it. I can manually move the chain onto the biggest sprocket, but not currently using the shifter.  I've tried tightening the cable, but am not 100% sure what the starting position of the shifter should be (I've not found much on Youtube for this) and have double-checked I've routed the cable through the shifter properly (using parktool guide).  I'm officially stumped.

Does that make any sense? If so, does anyone have any advice? I can provide a photo if it helps. Any/ all suggestions welcome!

Cheers
T

I do my own work, I am no expert, but I have ideas. Are you using a 8 speed chain? A single speed chain is wider than an 8 speed chain and would probably not shift.
Is the chain the correct length? The Park Tool site has methods by which you can estimate if your chain length is long enough.  Duane

Hi Duane
I am using an 8 speed chain, and I'm fairly sure it's the right length, but i'll double check.  Thanks for the suggestion

T

Hopefully one of the Pros will be able to pin down the problem when they notice your post. However, the derailleur cog should be directly in line with each gear. Here is an excellent website that can help with many questions: http://sheldonbrown.com/derailer-adjustment.html    Best Wishes, Duane Smile
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
What was your first bicycle?
Yesterday 10:43 PM
First long distance ride..
Yesterday 10:33 PM
Is anyone riding with music?
Yesterday 10:12 PM
Great Giro
Yesterday 09:57 PM
Rusty chain inspite of cleaning,lubing
Yesterday 09:54 PM
What are your best tips for long rides?
Yesterday 06:26 PM
Massive Chainring redux
05-30-2025 06:47 PM
POLL: Are non-recumbent riders looking a...
05-30-2025 05:26 PM
Third best reason to ride a bent or trik...
05-30-2025 04:51 PM
The great thing about trikes
05-30-2025 04:33 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Criminal
18 posts
no avatar 2. GirishH
17 posts
no avatar 3. Painkiller
16 posts
no avatar 4. Flowrider
15 posts
no avatar 5. SPINMAN
14 posts