Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


Chain is loose when not pedaling
#1
Hi, this is my first post to the forum! I have an old Focus MTB, bought it just recently second hand and I am also new to biking so please excuse me for being naive.
The problem started after the first miles with the bicycle, hearing a noise from the back. It was getting louder and louder very quickly and now, when I am pedaling everything is normal but when I stop and keep the pedals still, while on the road, the chain turns really loose and even goes out of the ring. This happens all the time. Tried with some lube and also tried to see if there is an obvious problem with the chain but cant find anything. It is like the rear system, below the rings has some problem. Do not know the correct terminology so this may not help.
Any idea what this can be? Is there a way to adjust this system and make it work properly?
Thanks
  Reply
#2
Check to make sure your Idler pully's on the rear derailleur are both free moving. if not, take out of the cage and clean and lube.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
(07-19-2015, 01:52 PM)painkiller Wrote:  Check to make sure your Idler pully's on the rear derailleur are both free moving. if not, take out of the cage and clean and lube.

Seems to be free moving so the problem maybe caused by sth else
  Reply
#4
Try to post a couple pics, side view, rear view of derailleur and side view of the whole drive train to show the slack. google chain stretch and check that.

With your chain still on the bike, place the ruler's '0' inch mark directly above the center of one of your chain pins. Now count 12 complete links. A complete link equals 1 inner and 1 outer. A rivet on a new chain should line up exactly with the 12 inch mark using this method
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
If I understand you correctly, when you coast (rolling, but not pedaling) the chain goes slack?
If so, that probably means the gear cluster in the rear is not ratcheting well and needs to be lubed. If you lay the bike on it's side and spin the rear wheel, you want to find the gap on the gear cluster where the center is spinning, but the outer part stays still. Drip chain lube or light oil right at the gap slowly and let it work itself in by keeping the wheel spinning. Try to avoid getting the lube anywhere else, especially at the center where it would go in to the wheel bearings.

If that doesn't help, you may need to work on/replace the gear cluster - figure out if it is a freewheel or cassette, etc.
  Reply
#6
Posting some pics...maybe can help
http://1drv.ms/1Kj5D2S
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
5,678
05-31-2020, 03:28 AM
Last Post: Joe_W
 
10,949
11-03-2016, 02:50 PM
Last Post: DaveM
 
8,489
09-05-2015, 09:12 AM
Last Post: Sixtoejoe
 
13,542
10-01-2014, 07:43 PM
Last Post: cny-man
 
85,067
09-02-2014, 04:45 PM
Last Post: cny-man
 
13,551
08-24-2014, 03:55 PM
Last Post: cr0nis

Forum Jump:

[-]
10 Latest Posts
New member old rider
Today 06:32 PM
Tubeless vs. tubes: What are the pros an...
Today 06:30 PM
Shoes for ingrown toenail
Today 05:13 PM
Good morning form Alberta CA
Today 12:24 PM
Let me introduce myself
Today 09:01 AM
Schrader vs Presta
Today 12:26 AM
Wishing you an Awesome 2025 & many fun r...
Today 12:16 AM
Pogačar's 2024 dominance
Yesterday 02:08 PM
New To The Forum
Yesterday 09:32 AM
Austin, TX Bike Lane Change
04-20-2025 11:51 AM

[-]
Top 5 Posters This Month
no avatar 1. GirishH
21 posts
no avatar 2. Flowrider
15 posts
no avatar 3. SPINMAN
14 posts
no avatar 4. meamoantonio
13 posts
no avatar 5. enkei
11 posts