Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Raleigh burner original handlebars ball bearings
#1
I built a Raleigh burner and the handle bars still move and squeak and I think it might be the ball bearings but I don't know what size ball bearing I need any help?
  Reply
#2
take them out and measure them. You will need calipers or a mic to measure them.

http://www.harborfreight.com/6-inch-digital-caliper-47257.html is what I use; often they come on sale for $10 or so.
Nigel
  Reply
#3
Or take one down to a bike store or a hardware store and they have neat hole measures that they fit the bearings through. Than they can sell you the right bearings. Most likely 1/4".........you did use a nice thick waterproof grease as used in cars or boat trailers.
Never Give Up!!!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
71,779
06-30-2023, 10:09 AM
Last Post: GirishH
 
4,585
02-07-2022, 02:46 PM
Last Post: Jesper
 
4,262
08-30-2021, 03:46 AM
Last Post: Poissonj1
 
3,793
08-24-2021, 10:54 PM
Last Post: ReapThaWhirlwind
 
3,114
07-19-2020, 10:00 PM
Last Post: karol

Forum Jump:

[-]
10 Latest Posts
Doctors are Prescribing Cycling
Yesterday 09:31 PM
How to improve cycling endurance? I've h...
Yesterday 06:27 PM
Hot Weather Safety
Yesterday 06:05 PM
Variation in Conti GP5000 sizing?
Yesterday 05:42 PM
Budget Gravel Bikes - useful YouTube vid...
Yesterday 03:43 PM
Continued learnings from bikepacking
Yesterday 08:37 AM
Cleats idea. What do you think?
Yesterday 08:28 AM
Has anyone tried one of these portable e...
Yesterday 06:43 AM
2007 Trek Pilot S.P.A. 5.2
06-29-2025 09:08 PM
First long distance ride..
06-29-2025 09:45 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
21 posts
no avatar 2. Flowrider
19 posts
no avatar 3. meamoantonio
13 posts
no avatar 4. rydabent
12 posts
no avatar 5. enkei
10 posts