Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


Stripped & stuck nondrive crank bolt
#1
Hi,

I have an ~12 year old Giant OCR1 with a 3 x 9 truvativ elite drivetrain that I picked up from craigslist. Recently, the bottom bracket started to creak, and when I went to investigate the situation, I found that the left (nondrive) side crank bolt was stripped. When I took it to the LBS, they gave it a shot, and then phoned me to pick it up: they couldn't get it unstuck and didn't have a solution for me.

The next best approach I could find online was to JB-weld an 8 mm allen to the bolt, and then use a breaker to remove it. Unfortunately, the JB weld did not hold under force.

Today, I bought a set of bolt extractors, and proceeded to attempt to conquer the problem with a more destructive approach. To make a long story short, I now have a set of trashed bolt extractors and a bike that still has a crankset stuck on it, except now there is an 8 mm whole drilled into the crank bolt (used to set a #5 bolt extractor unsuccessfully), so you can see straight through to the other side when the drive-side crank bolt is removed.

I'm not sure how to proceed next? does anyone have an idea? From some extensive searching, it appears possible that the person who assembled the bike could have used red loctite on this bolt since they have a slight tendency to back out with use?

I have resolved to purchasing a replacement crankset, but don't know enough about how these items come apart... can I take the drive crank arm off and then fish the stuck crank + spindle out the other side? or are the parts tapered such that they can only be removed from one side (e.g. spindle from the crank side)? Will I have to remove the bottom bracket on the drive side?

Thanks in advance!

Tim
  Reply
#2
Tim;

we need pictures.

If you are going to replace the crankset and bottom bracket for sure; I would take an angle grinder and cut the axle off just inside the crank arm on the side that you can't remove the crank arm. Take the pedals off first if you want to salvage them. Once the crank arm is gone, it is easy to take apart the BB.
Nigel
  Reply
#3
Hi Nigel,

I'll take some photos when I get home tonight. Some research identified the bicycle as a 2005 model. I can confirm that it has a TruVativ GIGA pipe SL bottom bracket, (tentatively w/ 118mm spindle from the description above)....

This is apparently out-of-date technology? I'd prefer to keep a triple crankset on it, and found an updated edition of the same Truvativ Elita model, but it uses a GxP bottom bracket. Since I'm trashing this one (cutting the spindle), can I swap over to the GxP BB on this bike so I can use the newer crankset?

All of the details of these parts has my head spinning.

Thanks!

Tim
  Reply
#4
(05-29-2013, 11:45 AM)Timfoley Wrote:  Hi Nigel,

I'll take some photos when I get home tonight. Some research identified the bicycle as a 2005 model. I can confirm that it has a TruVativ GIGA pipe SL bottom bracket, (tentatively w/ 118mm spindle from the description above)....

This is apparently out-of-date technology? I'd prefer to keep a triple crankset on it, and found an updated edition of the same Truvativ Elita model, but it uses a GxP bottom bracket. Since I'm trashing this one (cutting the spindle), can I swap over to the GxP BB on this bike so I can use the newer crankset?

All of the details of these parts has my head spinning.

Thanks!

Tim
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
if that is the case it is a hollow splined ISIS bottom bracket correct?. If so STOP! STEP back for a moment. Then it would not be external bearing.Which means yes you may be able to use a spanner or tap a screw driver on the BB and cup to slip out the old and replace the new crank with new bb. you need the truativ bb removal tool. looks like the Park BBT-7 but a couple more notches or in socket form, so remove the free side and spanner wrench or flat blade screwdriver tap out the other side and should fall out. or lock the spindle from spinning and bore out the stripped bolt and will fall out once the cups are loosened. to reassemble you still need the truvativ BB tool so buy it before proceeding. you will need new crankset and new Bottom bracket
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
34,987
07-19-2021, 12:00 AM
Last Post: rbx
 
35,029
04-14-2021, 01:28 AM
Last Post: Jesper
 
4,813
07-22-2020, 07:08 PM
Last Post: Jesper
 
3,428
03-08-2020, 02:34 PM
Last Post: G_M
 
8,535
02-06-2016, 07:17 PM
Last Post: Lighttower
 
23,917
06-06-2015, 06:53 PM
Last Post: garrett01
 
12,700
05-19-2015, 08:48 AM
Last Post: alexwang32
 
18,585
05-06-2015, 01:38 AM
Last Post: eastman

Forum Jump:

[-]
10 Latest Posts
Ride and Remember
Yesterday 08:52 PM
Front derailer not moving
Yesterday 08:49 PM
Dropper Post: Pros and Cons
Yesterday 05:03 PM
What are the best cost effective ways to...
05-08-2025 09:33 PM
Dropper Post: Hints and Tips
05-08-2025 07:59 PM
Hoping someone can help me identify this...
05-07-2025 05:47 PM
How to deal with rusty chain
05-07-2025 12:50 PM
Wearable Fitness Trackers
05-06-2025 11:39 PM
Gu/SiS/Energy Gels replacement
05-06-2025 11:37 PM
Good morning form Alberta CA
05-06-2025 11:34 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
24 posts
no avatar 2. Flowrider
18 posts
no avatar 3. meamoantonio
18 posts
no avatar 4. enkei
16 posts
no avatar 5. GirishH
11 posts