Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

Best Black Friday E-Bike Deals 2024 | Up to $1,700 in Savings

New: Take Part in the November Giveaway: Starts November 18th


Left gear shift not working
#1
Just starting to get into biking. Have been using right gear exclusively, with left gear at 1. Today started to use left gear, shifted to 3. There was an immediate change in gears that I could feel, but then a lot of clanky racket happened and suddenly the change vanished and the left gear doesn't work anymore - seems to be stuck at 1. The number will switch to 2 and 3, but the gear stays the same. I tried to take a look and noticed that the cord connected to the left gear is much looser than the one connected to the right gear. Of course being new to bikes I didn't want to try to fix it myself just yet, for fear of messing it up further. What should I do to fix this?
  Reply
#2
Take some pics of what you have, but it sounds like your cable popped loose
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
(03-11-2013, 08:41 PM)painkiller Wrote:  Take some pics of what you have, but it sounds like your cable popped loose

If the cable popped loose, how would a newb go about putting it back in?
  Reply
#4
after i know what exactly we are dealing with i can tell you. work on pics. i want to see the shifters and the front derailluer areas
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
(03-11-2013, 09:37 PM)painkiller Wrote:  after i know what exactly we are dealing with i can tell you. work on pics. i want to see the shifters and the front derailluer areas

Not sure exactly what you're looking for so I took a few different angled shots of my front derailleur.

Left shifter:
http://i.imgur.com/FwVSOu8.jpg

Derailleur:
http://i.imgur.com/kfXl62w.jpg
http://i.imgur.com/wSEv2kV.jpg
http://i.imgur.com/9EeKSQZ.jpg
  Reply
#6
yes cable is slackened, has anybody messed around with it or did this just happen? click the top trigger three or 4 times, loosen the socket bolt on the derailluer and with needle nose pliers pull cable tight and tighten bolt
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#7
(03-11-2013, 10:03 PM)painkiller Wrote:  yes cable is slackened, has anybody messed around with it or did this just happen? click the top trigger three or 4 times, loosen the socket bolt on the derailluer and with needle nose pliers pull cable tight and tighten bolt

It just happened while I was switching gears in the middle of a ride.

Went down to the bike lockers - held the cable in place with the needle nose pliers, and used my allan key to tighten the bolt. Works like a charm. Thank you so much!
  Reply
#8
its okay to clean the grit and grime, lube once in awhile too. Smile
glad it worked. every now and again go thru the bike and check for loose bolts, especially the crank arms
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Moving in Style: Beyond Regular Transpor...
Today 09:23 PM
Tire Sizing (Or How to Buy A Tire)
Today 12:36 PM
The Roaming Radrunner Vlog 1 Why ride ...
Today 09:17 AM
Recording Bike Rides
Yesterday 01:37 AM
Ketone Ester $$$
11-19-2024 01:04 AM
Trek domane tyre
11-18-2024 01:58 PM
Old fossil buys Ebike
11-17-2024 06:39 AM
Bike bus
11-17-2024 12:14 AM
Second wheelset for ebike.
11-16-2024 08:20 PM
Humber "Eiffel Safety" bike 1800s
11-16-2024 03:05 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
22 posts
no avatar 2. enkei
19 posts
no avatar 3. GirishH
14 posts
no avatar 4. ReapThaWhirlwind
11 posts
no avatar 5. Flowrider
11 posts