Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the June Giveaway for a brand new Merida Matts 6.5 bicycle


Cone wrenches for overhauling hubs
#1
I'm looking to get some cone wrenches so I can overhaul my wheel hubs and am looking for advice on which combo of wrenches to get. I'm in the process of slowly adding tools to my collection as I start new projects (assuming I'll continue to use them inthe future)

I don't think I need the Park Shop Tool set, so I'm looking at the Park Double Set:

DCW-13/15
DCW-13/14
DCW-17/18
DCW-15/16

A) Is it a good idea to have all 4?
B) Is there a better size combo to get?
C) Anything else to keep in mind? (I'm not sure what size I need for my hubs, is there an easy way to measure?)

Also, as an added bonus question: do I need to get the bearings at a bike shop or can I pick up 1/4 bearings from the hardware store? That's the standard size, correct?

Thanks in advance
  Reply
#2
I have a set like this, with two sizes each end:

http://www.chainreactioncycles.com/Models.aspx?ModelID=32405

Not workshop quality and probably not as good as Park tools spanners/wrenches, but I've had them for years and have had no problems with them.

I don't think you need to tighten cone lock nuts super tight in any case, just nip them up. The whole assembly is secured by the quick release/wheel nuts in addition to the cone locking nuts and I've never had any of my hubs come lose.
  Reply
#3
I have this Avenir set:
http://www.amazon.com/Avenir-94-27-902-Cone-Wrench-Set/dp/B00165P53K/ref=sr_1_1?s=cycling&ie=UTF8&qid=1345219645&sr=1-1&keywords=avenir+cone+wrench

As Xerxes alluded to; cone wrenches are fragile. Cones are snugged tight, not highly torqued.
Nigel
  Reply
#4
Thanks for the responses, guys. I hadn't seen the style with 2 sizes on each end, that seems like a good idea.

I had seen those Avenir ones, but the reviews were all over the place on their quality. I'll give them another look (and remember to be gentle on them...)
  Reply
#5
Make sure that no one ever uses your cone wrenches for anything but bearing cones, and all will be fine.

If you are handy with a hack saw and files, you can easily make your own......
Nigel
  Reply
#6
I prefer to use standard open end wrenches for the locknuts which means you wouldn't have to get a 17 or 18 most likely.
13, 15, 17 seem to account for about 90% of wheels, but if you don't get a full set, pretty much guaranteed that you'll need a 14 & 16. Wink
  Reply
#7
I use a Nashbar tool set, it has a set in it that has worked for me so far.
http://www.nashbar.com/bikes/Product_10053_10052_524452_-1___202586
Have fun and just enjoy the ride
  Reply
#8
Here is a thread if you are pretty handy with torches and such.... http://forums.bikeride.com/thread-931.html
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
429
01-12-2020, 08:47 AM
Last Post: Nicholas
 
423
12-08-2019, 05:35 AM
Last Post: Joe_W
 
845
10-14-2019, 06:55 AM
Last Post: walter
 
4,910
02-28-2015, 01:39 PM
Last Post: JanJ
 
5,130
01-18-2015, 06:34 PM
Last Post: cny-man
 
3,877
10-05-2014, 04:48 AM
Last Post: gfish
 
20,762
08-20-2012, 09:06 PM
Last Post: xerxes
 
6,606
03-23-2012, 04:51 PM
Last Post: trevgbb

Forum Jump:

[-]
10 Latest Posts
Merida Matts 6.5 Bicycle | June 2020
Today 07:20 PM
Hello from south west Florida :)
Today 06:50 PM
Clunk noise from front cogs
Today 06:00 PM
Rust on the handlebar
Today 04:59 PM
Vintage Road Bike Restoration HELP
Today 04:14 PM
Help me identify my vintage Bridgestone ...
Today 04:05 PM
Just got my bike fixed up, looking for a...
Today 08:58 AM
Bike front rim question replacement
Yesterday 08:29 AM
Bike brand “Perfect”
Yesterday 07:26 AM
BAGGI 1936(?)
Yesterday 03:33 AM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
27 posts
no avatar 2. CharleyFarley
19 posts
no avatar 3. Painkiller
15 posts
no avatar 4. Joe_W
13 posts
no avatar 5. Criminal
10 posts