Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


Need input on choosing the correct SA hubs
#1
I posted this first in the maintenance section before I realize it was in the wrong place. Sorry!

I have recently purchased a 3 speed Raleigh Sports. I have to replace both 26 x 1-3/8" wheels. I am not so concerned with keeping the bike date or period correct but will try to when possible.

I want new alloy 36 hole rims for front and rear and Sturmey-Archer hubs with a front generator hub. I would like front and rear hubs to have brakes. I'm having a bit of a problem understanding all of the options available in SA hubs. Will someone recommend which Sturmey-Archer hubs I need?

Thanks,
  Reply
#2
On the rear, you have two choices, a coaster brake (pedal backwards to brake) or a drum brake which will use a normal hand operated brake lever. It looks like there's two groups of hubs.
S-RC3 is the 3 speed coaster brake. X-RD3 and XL-RD3 have drum brakes. I think the XL has a larger brake, but I don't see any other difference. I think these all have an "over locknut dimension" of 130mm. There's also the AWC, SAB3, and AB3 that have a shorter over locknut dimension.

The OND is determined by your frame. If it's a steel frame, you can adjust the frame fairly easily if needed, but no reason to do it more than you need to.

The RX-RD3 uses a twist shifter instead of the older style trigger shifter.

Coaster will be simpler to install and you won't need a brake lever. I don't think there's an issue setting up a drum brake on a bike that didn't have one, but you might have to get slightly creative with hardware and buy a few extra bits to put it all together.

For the front, I think your two options are: X-FDD, XL-FDD
+++++++++++++++++++++++++++++

On rims, note that there are two different 26x 1 3/8 sizes. On a Raleigh, I think you would have the "EA3" size, but you need to confirm.
http://sheldonbrown.com/rim-sizing.html
Also, I'm not sure what the availability of decent aluminum rims in this size is. It is a pretty deprecated wheel size.
Since you're going to hub brakes, you could change the wheel size as long as there is clearance in the frame for them. 650B is a size with growing interest (and parts) though still somewhat rare. Or you may be able to go up to 700C which is probably the most common rim size, but it is 2-3 cm bigger in diameter.

An interesting project and may well be worth doing. But you're going into somewhat uncharted territory here. You'll need to do a little research, measuring, etc. Pay attention to things like axle diameters, wheel sizes, tire availability, etc. etc.

Good luck!
  Reply
#3
Thanks Dave,
That was the information I was hoping for. I think I may use CR-18 1-3/8 aluminum rims.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
5,236
06-09-2023, 08:18 PM
Last Post: Jesper
 
4,093
06-23-2019, 02:14 PM
Last Post: JoJoJo
 
21,435
10-02-2014, 08:16 AM
Last Post: 1FJEF
 
14,192
07-01-2013, 06:55 PM
Last Post: 1FJEF
 
9,077
11-04-2012, 08:53 PM
Last Post: krashTest

Forum Jump:

[-]
10 Latest Posts
Unlocking speed on my e-bike.
Yesterday 01:04 PM
MTB handlebar width
Yesterday 06:25 AM
What is your favorite MTB trail/route in...
Yesterday 06:16 AM
What are the best cost effective ways to...
Yesterday 06:07 AM
Bridgestone Blouson bike.
04-26-2025 07:57 PM
Thoughts on paceline riding
04-26-2025 05:51 PM
2011 GT Tachyon upgrade/mod
04-26-2025 05:04 PM
RECOMMENDATION
04-26-2025 05:01 PM
Injury Recovery
04-26-2025 04:59 PM
1987 Tommaso Alloy lugged frame
04-26-2025 04:58 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. enkei
16 posts
no avatar 3. Flowrider
15 posts
no avatar 4. meamoantonio
13 posts
no avatar 5. SPINMAN
12 posts