Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Kids 24" Mountain bike, Dirt jump project?
#1
Hi,
I got this 24" wheeled kids bike cheap, I’m thinking of making it into a dirt jump type bike is this possible? I’m not too sure of what frame geometry a DJ bike requires but in think what I have read so far is that the reach to the handle bar is important. Also I dunno if the frame and fork can take the abuse. does anyone have any suggestions are hints, the bike is a Carrea blast 24 disc spec 2009 (I think) with a RST Capa t8 fork, it is missing the wheels and a brake.

I’m thinking of removing the paint from the fame and fork and polishing them like I seen someone do in another thread. Then in the distance future have it kited out with hydraulic disc brake's and single front chain ring with a derailleur on the rear. What’s everyone think?

[attachment=2019]

[attachment=2020]
  Reply
#2
Looks like a nice frame with ok front suspension. As far as dirt jumping I am not certain how 6061 aluminum material would hold up??
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
(03-26-2011, 09:17 AM)Bill Wrote:  Looks like a nice frame with ok front suspension. As far as dirt jumping I am not certain how 6061 aluminum material would hold up??

i was thinking maybe that 6061 aluminum would not be suitable. it is a really light frame i weight it at 1.75Kg but dunno how accurate the scale is. i'll do some online research to see what i find.
  Reply
#4
#1 are you sure that there are no cracks in the frame?

Easy way to determine is tapping it with a really light (like 50 gram) hammer and listening. Tap lightly all over the frame, no more than 50mm between each tapping location.

Aluminum frames can develop cracks when abused, and a crack can lead to catastrophic failure at the most inopportune time.
Nigel
  Reply
#5
(04-12-2011, 05:23 PM)nfmisso Wrote:  #1 are you sure that there are no cracks in the frame?

Easy way to determine is tapping it with a really light (like 50 gram) hammer and listening. Tap lightly all over the frame, no more than 50mm between each tapping location.

Aluminum frames can develop cracks when abused, and a crack can lead to catastrophic failure at the most inopportune time.

i haven't giving it a real close look yet, i didnt know about that hammer trick i'll try it. the bike does look a bit abused lots of strips all over it.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
How do you jump?
Today 06:46 PM
Cycle packing or learning from other lon...
Today 09:14 AM
New Jersey's New E-bike Law
02-09-2026 03:12 PM
Hello, everyone!
02-09-2026 03:10 AM
Rim Depth Preference
02-08-2026 12:52 AM
How to keep your bicycle safe?
02-07-2026 12:26 PM
How can I fuse & wire U7 headlights to Y...
02-06-2026 12:28 PM
Anyone tried Montella Cycling? What size...
02-02-2026 04:50 AM
Cheating on your bicycle
02-02-2026 03:16 AM
The great thing about trikes
02-01-2026 10:18 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
18 posts
no avatar 2. Flowrider
16 posts
no avatar 3. GirishH
16 posts
no avatar 4. rydabent
12 posts
no avatar 5. meamoantonio
11 posts