Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Vitesse Signal Giveaway's Winner Announced


Kids 24" Mountain bike, Dirt jump project?
#1
Hi,
I got this 24" wheeled kids bike cheap, I’m thinking of making it into a dirt jump type bike is this possible? I’m not too sure of what frame geometry a DJ bike requires but in think what I have read so far is that the reach to the handle bar is important. Also I dunno if the frame and fork can take the abuse. does anyone have any suggestions are hints, the bike is a Carrea blast 24 disc spec 2009 (I think) with a RST Capa t8 fork, it is missing the wheels and a brake.

I’m thinking of removing the paint from the fame and fork and polishing them like I seen someone do in another thread. Then in the distance future have it kited out with hydraulic disc brake's and single front chain ring with a derailleur on the rear. What’s everyone think?

[attachment=2019]

[attachment=2020]
  Reply
#2
Looks like a nice frame with ok front suspension. As far as dirt jumping I am not certain how 6061 aluminum material would hold up??
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
(03-26-2011, 09:17 AM)Bill Wrote:  Looks like a nice frame with ok front suspension. As far as dirt jumping I am not certain how 6061 aluminum material would hold up??

i was thinking maybe that 6061 aluminum would not be suitable. it is a really light frame i weight it at 1.75Kg but dunno how accurate the scale is. i'll do some online research to see what i find.
  Reply
#4
#1 are you sure that there are no cracks in the frame?

Easy way to determine is tapping it with a really light (like 50 gram) hammer and listening. Tap lightly all over the frame, no more than 50mm between each tapping location.

Aluminum frames can develop cracks when abused, and a crack can lead to catastrophic failure at the most inopportune time.
Nigel
  Reply
#5
(04-12-2011, 05:23 PM)nfmisso Wrote:  #1 are you sure that there are no cracks in the frame?

Easy way to determine is tapping it with a really light (like 50 gram) hammer and listening. Tap lightly all over the frame, no more than 50mm between each tapping location.

Aluminum frames can develop cracks when abused, and a crack can lead to catastrophic failure at the most inopportune time.

i haven't giving it a real close look yet, i didnt know about that hammer trick i'll try it. the bike does look a bit abused lots of strips all over it.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
3,401
04-04-2014, 10:57 PM
Last Post: fishboy316
 
7,010
10-02-2013, 11:20 AM
Last Post: nfmisso
 
13,211
03-06-2012, 05:39 PM
Last Post: barefooter
 
12,661
07-24-2011, 11:22 AM
Last Post: TonyE
 
14,559
09-03-2010, 12:17 AM
Last Post: Bill

Forum Jump:

[-]
10 Latest Posts
Cycling is Anti-Aging, But There's a Cat...
Yesterday 07:01 PM
Wishing you an Awesome 2025 & many fun r...
Yesterday 08:53 AM
What's your most favourite track in your...
12-31-2024 06:09 PM
Energy gels for cycling
12-31-2024 05:56 PM
Newbie from , Texas
12-31-2024 09:44 AM
How many bikes do you have now?
12-31-2024 02:28 AM
What are the best maintenance practices ...
12-30-2024 10:55 PM
Best Phone Mount and Best Headlight
12-30-2024 10:26 PM
Operation of Santa Monica Ebike
12-30-2024 05:01 PM
Pogačar's 2024 dominance
12-29-2024 04:14 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. Alexjohnson
19 posts
no avatar 3. enkei
10 posts
no avatar 4. Flowrider
10 posts
no avatar 5. JeffAP
7 posts