Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


How to tune internal gears?
#1
Hallo,

I have a bike with internal gears:
5 speed Sachs Torpedo Pentasport.

It has two adjustment cables from both sides of the rare wheel.
I just can't get it out, how to use them to tune the gears.

Does anyone have the same or similar gear hub and can share the knowledge?
  Reply
#2
Interesting, I've never seen one of these. It appears most online information is in German only. If you can't speak German or work with a google translation you might try emailing Sachs/SRAM (http://www.sram.com) directly to see if they have any materials on this.
  Reply
#3
http://www.ureader.de/message/684679.aspx Wrote:So geht's bei der zweiseiligen Pentasport:
1. Zur Einstellung den 4. Gang einlegen und Pedalarm dann 1-2 mal
durchdrehen, damit der Gang einrastet.
2. Dann an beiden Seilzgen die Fixierhlse gerade so weit aufschieben,
da das Zugkettchen straff ist. Das Zugkettchen darf dabei *nicht*
herausgezogen werden.

Anschlieend die Kontrolle rechtes Zugseil:
- 2. Gang einlegen und Pedalarm 1-2 mal durchdrehen
- Die Einstellung des rechten Zugkettchens ist zu lose, wenn es sich von
Hand noch weiter aus der Kettenleitmutter herausziehen lt.
- Die Einstellung des rechten Zugkettchens ist zu stramm, wenn der
Schalthebel nur schwer in Position 2 zu bringen ist
Ggf. rechtes Zugseil dann nochmal einstellen

Und die Kontrolle linkes Zugseil:
- 1. Gang einlegen und Pedalarm 1-2 mal durchdrehen
Falls das Zugseil zu lose oder zu stramm ist (siehe rechts Zugseil),
dann das linke Zugseil nochmal einstellen
1. Select fourth gear, turn crank 2-3 times to complete gear change.
2. move bushing on both cables until both chains are just taut, chains must not be pulled out!

control of right cable
- select 2nd gear and turn crank twice
- if you have difficulty to select 2nd gear, cable is too tight. If you can pull the chain a bit further out of the gear it is too lose.

left cable
- select first gear, see description right cable

If you find something else, please post, I will tr to help
  Reply
#4
Thanks,

I will try those recommendations.

Regards
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Food after late training ride
Yesterday 02:48 PM
1987 Tommaso Alloy lugged frame
Yesterday 11:18 AM
Injury Recovery
Yesterday 08:20 AM
RECOMMENDATION
04-24-2025 04:24 PM
New Member
04-24-2025 03:31 PM
2011 GT Tachyon upgrade/mod
04-24-2025 08:45 AM
Doctors are Prescribing Cycling
04-23-2025 09:50 PM
What was your first bicycle?
04-23-2025 09:17 PM
New Rider Here — Momo + Viribus = Ready ...
04-23-2025 09:15 PM
The great thing about trikes
04-23-2025 03:47 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
24 posts
no avatar 2. SPINMAN
14 posts
no avatar 3. meamoantonio
13 posts
no avatar 4. Flowrider
12 posts
no avatar 5. enkei
11 posts