Plastic gripshift

loreny1 · 03-10-2010, 07:21 PM

I can't swap out my gear cable because my (Schwinn SRAM MRX Pro 3.6 Racer) plastic grip shift won't come apart without breaking. So far I have cracked a few pieces off but I think it's still good. Any suggestions?

Alex Ramon · 03-10-2010, 07:27 PM

This isn't the exact same gripshift, but may offer some tips that could help:

http://bikeride.com/grip-shift-cable/

Upload some photos of your shifter and the pieces if you can!

loreny1 · 03-11-2010, 07:13 PM

(03-10-2010, 07:27 PM)Alex Ramon Wrote: This isn't the exact same gripshift, but may offer some tips that could help:

http://bikeride.com/grip-shift-cable/

Upload some photos of your shifter and the pieces if you can!

I did use that video for reference in fact it was the reason I was confident that I could do it. I thank you for assisting.

10 Latest Posts
Moving in Style: Beyond Regular Transpor... Today 04:49 AM
Great UK Cycle Camping Map, For E-Bikes,... 11-10-2024 06:55 AM
Cycling is Anti-Aging, But There's a Cat... 11-10-2024 06:48 AM
BAGGI 1936(?) 11-09-2024 10:24 AM
Do you have a four foot rule? 11-09-2024 10:10 AM
Trek domane tyre 11-08-2024 05:07 PM
Greetings! 11-08-2024 04:39 PM
Peugeot Nouveau Folder 11-08-2024 04:34 PM
Community Discussion Cycling Myths 11-07-2024 09:05 PM
Tasmania! Anyone ridden here? 11-07-2024 05:15 PM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom