Plastic gripshift

loreny1 · 03-10-2010, 07:21 PM

I can't swap out my gear cable because my (Schwinn SRAM MRX Pro 3.6 Racer) plastic grip shift won't come apart without breaking. So far I have cracked a few pieces off but I think it's still good. Any suggestions?

Alex Ramon · 03-10-2010, 07:27 PM

This isn't the exact same gripshift, but may offer some tips that could help:

http://bikeride.com/grip-shift-cable/

Upload some photos of your shifter and the pieces if you can!

loreny1 · 03-11-2010, 07:13 PM

(03-10-2010, 07:27 PM)Alex Ramon Wrote: This isn't the exact same gripshift, but may offer some tips that could help:

http://bikeride.com/grip-shift-cable/

Upload some photos of your shifter and the pieces if you can!

I did use that video for reference in fact it was the reason I was confident that I could do it. I thank you for assisting.

10 Latest Posts
Do you have a four foot rule? Yesterday 02:21 PM
Let me introduce myself Yesterday 07:56 AM
Paris-Roubaix 04-18-2025 06:19 PM
What are the best cost effective ways to... 04-18-2025 01:34 PM
Climbing hills: Where have you found the... 04-18-2025 12:27 AM
Schrader vs Presta 04-17-2025 09:59 AM
New To The Forum 04-16-2025 11:50 PM
Good morning form Alberta CA 04-16-2025 08:16 AM
What is the best Mountain Bike you've ev... 04-15-2025 12:31 PM
Chainring Sizes 04-14-2025 09:28 PM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom