Plastic gripshift

loreny1 · 03-10-2010, 07:21 PM

I can't swap out my gear cable because my (Schwinn SRAM MRX Pro 3.6 Racer) plastic grip shift won't come apart without breaking. So far I have cracked a few pieces off but I think it's still good. Any suggestions?

Alex Ramon · 03-10-2010, 07:27 PM

This isn't the exact same gripshift, but may offer some tips that could help:

http://bikeride.com/grip-shift-cable/

Upload some photos of your shifter and the pieces if you can!

loreny1 · 03-11-2010, 07:13 PM

(03-10-2010, 07:27 PM)Alex Ramon Wrote: This isn't the exact same gripshift, but may offer some tips that could help:

http://bikeride.com/grip-shift-cable/

Upload some photos of your shifter and the pieces if you can!

I did use that video for reference in fact it was the reason I was confident that I could do it. I thank you for assisting.

10 Latest Posts
Cycling in the Wind Today 12:40 AM
Specialized expedition in need of repair Today 12:37 AM
What is your dream cycling destination? 04-24-2024 11:15 PM
1996 Cannondale Silkpath h300 upgrade 04-24-2024 09:11 PM
2010 Specialized Hardrock 04-23-2024 05:54 AM
QUINTANA ROO "KILO" 1999 04-22-2024 02:04 PM
How much do you bike per year? 04-22-2024 01:35 PM
Christmas presents for cycling 04-22-2024 01:31 PM
$10,000? 04-22-2024 01:26 PM
Do you have a four foot rule? 04-22-2024 01:12 PM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom