Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Gear troubles
#1
Hi,
A few weeks ago, the gear shift on the right hand side started moving freely, and I had to hold it in place. I tried to tighten it, but got less than half a turn before it seized up and stopped moving altogether. My boss took a look at it for me, took it apart a few times, and sort of got it working again. instead of the 4-5 speeds I could usually get on that side, I can now only get three.

She noticed that the covering on my cables were cracked in a few places due to the cold, and the wiring was exposed. She recommended that I grease up the cracks every few days, which I've been doing.

I cleaned and lubed up my chain yesterday, as well as tightened my brakes a little, and today, it's skipping when I pedal, as though it's stuck between gears. It does this no matter which gear I'm in. I've tried adjusting both sides, and it still does it. is there anything I can do myself? I really can't afford to buy a new gear system or have it looked at right now.

EDIT: the gear shifter in question:
[attachment=822]
  Reply
#2
I would suggest viewing these then read below if you already have....
http://bikeride.com/tune-up/

http://bikeride.com/lube-brake-shift-cables/

1. It does not sound like it is the shifter but exactly what you said the cracked cable housings which will let the bads of mother nature in causing anodizing, rusting, etc tear up your shifter and/or brake cables. Greasing them up really don't help all that much but prolong the problem. Your shifter is more less moving about freely because the cable is probably freezing up. You will need to get another cable sooner or later.

2. The skipping chain well maybe worn chain/gear cluster, bad derailler, OR just your shifter cables sticking causing the derailler not properly changing the gears! I would definitely try getting a new shifter cable, $4.50 will get you a COMPLETE cable replacement at walmart. All the videos on this site will show ya how to do that...
http://bikeride.com/replace-cable-housings/
http://bikeride.com/inner-shift-cable/
http://bikeride.com/inner-brake-cable/

Hope that helps,
Bill
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
I'm with Bill I think you need new set of cables for your bike. And watch the videos here. These videos are good info for all of us they have help me a few times.
My dad always told me a Sledge a matic can fix any thing.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Catastrophic bicycle failures
Yesterday 11:42 PM
Impromptu bikepacking/touring dilemma..
Yesterday 08:38 PM
I don't usually wear a bike helmet. Does...
Yesterday 08:34 PM
Bmx with 26 inch wheels
Yesterday 05:50 PM
Gila Monster Gran Fondo
Yesterday 05:41 PM
Hatch Chiles Rule!
Yesterday 05:10 PM
Steel road bikes with disc brake mountts
Yesterday 01:11 PM
How Bad Are E-bikes By You?
Yesterday 07:42 AM
Spoke Count Preference
09-30-2026 12:29 PM
Are 26" really dying out?
09-30-2026 12:23 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
21 posts
no avatar 2. Sidewinder
21 posts
no avatar 3. GirishH
18 posts
no avatar 4. SPINMAN
12 posts
no avatar 5. meamoantonio
11 posts