Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


Remove Cogs on FALCON 7 speed Freewheel
#1
I am changing a 7 speed Schwinn to a single speed. It has a Falcon freewheel. I have the freewheel off of the bike and have removed the core by turning the Falcon ring clockwise. I want to also remove the cogs. There is a locking ring on the outside of the freewheel that needs to be removed. But I don't know if the locking ring turns counterclockwise or clockwise and what tools I need to remove the ring and then take off the cogs. I assume I will need a bike chain whip. Can anyone give me some direction of getting that ring off?

This is my first time posting so I'm not sure if the picture I attached will appear of this post or not.

   
  Reply
#2
That's a very specific manufacturer's tool most likely.

In some cases, any lockring tool or lockring wrench can be used, but no promise you will be able to torque it back down.
  Reply
#3
Seems to me the lockring with have right handed threads, meaning lefty-loosey, righty-tighty. Or in other words, the normal counter-clockwise to loosen. The old Suntour FW used the last sprocket to hold everything together and it was a right hand threaded sprocket to that when pedaling it is under constant tightening forces.
A standard Hozan spanner or other spanner that fits the notch will work. You will need a way to secure the FW so that it does not spin. Again, Hozan made a tool for this that mounts in a vice, but it can also be done using the vice without the special tool using soft jaws that will allow the vice to bite into the large sprocket to keep it from slipping.
Clamp the largest sprocket in the vice using soft jaws. Make it good and tight, they turn the lockring off counter-clockwise. The lock ring will be on very tight, thus requiring lots of torque to remove it.
  Reply
#4
(01-02-2022, 07:54 AM)jeffg Wrote:  Seems to me the lockring with have right handed threads, meaning lefty-loosey, righty-tighty. Or in other words, the normal counter-clockwise to loosen. The old Suntour FW used the last sprocket to hold everything together and it was a right hand threaded sprocket to that when pedaling it is under constant tightening forces.
A standard Hozan spanner or other spanner that fits the notch will work. You will need a way to secure the FW so that it does not spin. Again, Hozan made a tool for this that mounts in a vice, but it can also be done using the vice without the special tool using soft jaws that will allow the vice to bite into the large sprocket to keep it from slipping.
Clamp the largest sprocket in the vice using soft jaws. Make it good and tight, they turn the lockring off counter-clockwise. The lock ring will be on very tight, thus requiring lots of torque to remove it.

Thanks Jeff. I figured I could use a vise to hold the largest cog, but wasn't aware of a spanner. I thought it would loosen counter-clockwise so thanks for the affirmation. I'll see what I can find online for a spanner. Thanks for your help.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Have you Ever Tried an Electric Bike?
Today 08:55 AM
Pogačar's 2024 dominance
Today 07:22 AM
What is the best Mountain Bike you've ev...
Yesterday 08:22 PM
Hello, from Friendly Manitoba
Yesterday 07:14 PM
braking by reversing the pedals
Yesterday 02:08 PM
Giant reporting profits are 60% down
Yesterday 09:50 AM
Thoughts on tariff effects on the cyclin...
04-05-2025 10:30 AM
What was your first bicycle?
04-04-2025 11:07 PM
Post-Ride Nutrition
04-03-2025 02:06 AM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
04-03-2025 02:03 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. Flowrider
18 posts
no avatar 3. Jake1
14 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. SPINMAN
9 posts