Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the October Giveaway to Win the Qiolor TIGER Retro Electric Bike


Pads are not parrallel to rim
#1
Hello,
On both the front and rear brakes, the pads are not parrallel to the rims. Is there anyway to twist the pulls on the brakes so that the pads are parrallel? Thank you for any advice.
  Reply
#2
Need more info! V-brakes? Cantilevers, etc?

Since you mention that it is both front and rear, it sounds intentional. Let me ask you - are the front ends of the pads slightly closer than the trailing ends, and by roughly equal amounts on all four?
If so, that is called 'toe' and helps to reduce brake squeal.
Wheelies don't pop themselves. (from a QBP fortune cookie)
  Reply
#3
Dia Compe side pull brakes. It couldn't be intentional, it is a lot out of parallel on both but even more on the back. Wondering how to twist them.

(10-08-2012, 08:13 PM)RobAR Wrote:  Need more info! V-brakes? Cantilevers, etc?

Since you mention that it is both front and rear, it sounds intentional. Let me ask you - are the front ends of the pads slightly closer than the trailing ends, and by roughly equal amounts on all four?
If so, that is called 'toe' and helps to reduce brake squeal.
  Reply
#4
now its time for some nice close up pics from different angles. before we freak out and cop a head rush and mess it up. then we may help you better
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
I just made the coffee anyone interested? Wink
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#6
(10-09-2012, 07:21 AM)Bill Wrote:  I just made the coffee anyone interested? Wink

Coffee alright those pics r comin!
  Reply
#7
twisting brake arms with break the brakes - do NOT do it.

Best and safest solution is to replace the Dia-Comps with Tektro dual pivot side pulls or similar.
Nigel
  Reply
#8
I was afraid of that. so here is the full story. I am reluctant to admit that this is on a recumbent! (Dont want to be discriminated against Smile ) ON the front wheel I need a lefthand pull to avoid the chain on the right. Or I could go with a Tektro r559 and mount it behind the fork, thereby putting the pull on the left. I need the r559 for the extra long reach. Then I could put a Tektro r539 on the back.

Or Bachetta makes a very nice light brake set with a left hand pull for $150 each. In that case I would need to figure out if I could drill out the back of the fork to accept a recessed nut.

Have considering which route to go, whether it is worth the extra dollars for the lighter Bachetta, or just with the larger, heavier Tektro.

Being presently underemployed and having more time then money right now, was tempted to postpone the decision and try to correct the Dia Comes.
  Reply
#9
Genshu - you just lost me. You seem to know enough about brakes (considering the fact that you're a 'bent rider Tongue ), that we must not be following your original question. Are the pads not aligned with the curvature of the rim. Pics would really help!
Wheelies don't pop themselves. (from a QBP fortune cookie)
  Reply
#10
Recumbent - I have heard (rumour) that they are typically heavier and faster than "standard" bicycles; thus it makes sense to go with the most powerful brakes you can find - not some super expensive fly wieghts. Tektro R556/559 and R536/539 brakes are incredibly powerful.
Nigel
  Reply
#11
good to hear that Tektro's are strong. pics coming havent joined the smart phone realm yet. The arms are way out of line with the plane of the rim.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
5,527
09-13-2019, 06:00 PM
Last Post: CharleyFarley
 
8,269
09-02-2019, 11:26 AM
Last Post: Aab
 
3,264
08-11-2019, 09:25 AM
Last Post: Painkiller
 
8,390
07-03-2015, 02:09 AM
Last Post: pedroukukuk
 
16,571
03-30-2015, 07:00 PM
Last Post: Painkiller
 
6,640
08-22-2014, 09:40 PM
Last Post: barney
 
21,703
02-20-2014, 09:08 AM
Last Post: cny-man

Forum Jump:

[-]
10 Latest Posts
Moving in Style: Beyond Regular Transpor...
Yesterday 09:11 PM
Great UK Cycle Camping Map, For E-Bikes,...
11-10-2024 06:55 AM
Cycling is Anti-Aging, But There's a Cat...
11-10-2024 06:48 AM
BAGGI 1936(?)
11-09-2024 10:24 AM
Do you have a four foot rule?
11-09-2024 10:10 AM
Trek domane tyre
11-08-2024 05:07 PM
Greetings!
11-08-2024 04:39 PM
Peugeot Nouveau Folder
11-08-2024 04:34 PM
Community Discussion Cycling Myths
11-07-2024 09:05 PM
Tasmania! Anyone ridden here?
11-07-2024 05:15 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. enkei
22 posts
no avatar 2. GirishH
17 posts
no avatar 3. Jesper
16 posts
no avatar 4. Flowrider
14 posts
no avatar 5. Talha
10 posts