02-06-2010, 05:40 PM
this are the ingredients.
1- one 3x3 foot piece of 1-inch plywood or particleboard ( this is the base of the stand .
2- one 1-inch threaded pipe flange ( for joining the upright to the base).
3- four each 1 1/4-inch bolts washers and nuts ( for attaching the flange to the base ).
4- one 5 foot section ( or whatever length best fits your height ) of 1- inch -diameter pipe treaded on both ends (this is the upright ).
5- one 1x3/4 -inch 90- degree reducer pipe elbow ( for joining the arm to the upright ).
6- one 2-foot section of 3/4-inch-diameter pipe treaded on both ends ( this is the arm ).
7- one 5-inch section of 4x4 ( to make the clamp jaws ).
8- one pony clamp fixture ( style no. 50; go here to see what it looks like; adjustableclamp.com/cf50).
9- eight 1-inch screws ( for attaching the jaws to the clamp ).
this is a home made bicycle workshop
1- one 3x3 foot piece of 1-inch plywood or particleboard ( this is the base of the stand .
2- one 1-inch threaded pipe flange ( for joining the upright to the base).
3- four each 1 1/4-inch bolts washers and nuts ( for attaching the flange to the base ).
4- one 5 foot section ( or whatever length best fits your height ) of 1- inch -diameter pipe treaded on both ends (this is the upright ).
5- one 1x3/4 -inch 90- degree reducer pipe elbow ( for joining the arm to the upright ).
6- one 2-foot section of 3/4-inch-diameter pipe treaded on both ends ( this is the arm ).
7- one 5-inch section of 4x4 ( to make the clamp jaws ).
8- one pony clamp fixture ( style no. 50; go here to see what it looks like; adjustableclamp.com/cf50).
9- eight 1-inch screws ( for attaching the jaws to the clamp ).
this is a home made bicycle workshop