Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the June Giveaway for a Foldylock Pride bike lock by Seatylock


Scott Voltage yz-3 2008 problem
#1
Hello. I got a 2nd hand Scott voltage yz-3 2008 frame. Due to poor Mail Services, it appears that the frame has been hit durring the shippment. The tube where the crank hub is to be inserted ended up slightly deformed by like 1or2mm so it's not "so round" as it should be. It might not sound like much but it's enough for not being able to get the hub in. Any suggestions please?

Thank youConfused
  Reply
#2
(01-05-2010, 06:14 AM)valikek Wrote:  Hello. I got a 2nd hand Scott voltage yz-3 2008 frame. Due to poor Mail Services, it appears that the frame has been hit durring the shippment. The tube where the crank hub is to be inserted ended up slightly deformed by like 1or2mm so it's not "so round" as it should be. It might not sound like much but it's enough for not being able to get the hub in. Any suggestions please?

Thank youConfused

Hello valikek,
You have a picture you could post? It doesn't sound good of what you are explaining but it is best to see before I say anything. I think there is a tool to straighten that out unless I am thinking of something else.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
Managed to "re-round" it with a bit of heat ^^. Just gotta remake the first 3 or 4 rows of the thread and it's good. If there's anything else I`ll be back. Thanks anyway ^^
  Reply
#4
(01-05-2010, 09:22 AM)valikek Wrote:  Managed to "re-round" it with a bit of heat ^^. Just gotta remake the first 3 or 4 rows of the thread and it's good. If there's anything else I`ll be back. Thanks anyway ^^

Oh ok well congrats and glad you it going good so far. Just notate how it is threaded (left hand or right hand). Stinks that shipping did that. If it were me shipping I would've put atleast a couple used races in the BB for support. Also look over the frame very carefully to make sure it did not get bent out of whack.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#5
Na.. it's just the tube. The frame has some scratches from being used :p.. but has no cracks or anything. Will come back when I get it done Big Grin

Awesome site by the way
  Reply
#6
Um...Am I correct in assuming the bottom bracket shell was deformed? If so, it MIGHT be worse than you think.

The bottom bracket and bottom of the seat post bear almost all of the load imposed on a bicycle.

Reference: http://www.sheldonbrown.com/rinard/fea.htm Figure 7 shows the loads in clear cut numbers.

If the shell of the bottom bracket has been deformed, it could weaken the frame, and with the amount of force applied, it COULD result in a catastrophic failure of the shell. And I don't believe there is any way to tell before it actually happens.

I'm not saying the frame is junk, I'm just saying be careful. Bottom bracket shells weren't meant to be deformed and then reformed.
Dedicated scholar of bicycles
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post

Forum Jump:

[-]
10 Latest Posts
front derailleur won't go largest cog
Today 10:49 PM
Road helmet
Yesterday 02:49 PM
How to keep your bicycle safe?
06-20-2021 11:58 AM
How often do you use suspension fork loc...
06-20-2021 09:53 AM
what is good length for a folding lock?
06-20-2021 09:44 AM
Star blubike lube
06-20-2021 09:42 AM
It's here! Biking Down a Volcano at 58mp...
06-20-2021 09:28 AM
2021 Pro Road Cycling
06-20-2021 09:27 AM
Ethical Dilemma
06-18-2021 09:43 PM
Champagnolo Say None of Their Cranksets ...
06-17-2021 08:06 PM

[-]
Top 5 Posters This Month
no avatar 1. ReapThaWhirlwind
46 posts
no avatar 2. Jesper
22 posts
no avatar 3. JoJoJo
11 posts
no avatar 4. Zviedrs
10 posts
no avatar 5. ChaseCal
7 posts