Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

Best Black Friday E-Bike Deals 2024 | Up to $1,700 in Savings

New: Take Part in the November Giveaway: Starts November 18th


Clicking when pedaling on bike.
#1
Hi guys! I have an issue where I am getting a cranking noise ONLY when I’m on the bike pedaling. Does not happen when I spin the wheel. It seems to be louder when the bike is under more load. For example, if I go from stationary to pedaling in the smallest cog. It sounds like it’s coming from the derailleur, cassette area. I will link pictures of that area. Thanks in advance!

Pics - https://imgur.com/a/mYBnnwj
Video of noise - https://streamable.com/pveskk
  Reply
#2
(05-28-2020, 09:31 PM)mrich6347 Wrote:  Hi guys! I have an issue where I am getting a cranking noise ONLY when I’m on the bike pedaling. Does not happen when I spin the wheel. It seems to be louder when the bike is under more load. For example, if I go from stationary to pedaling in the smallest cog. It sounds like it’s coming from the derailleur, cassette area. I will link pictures of that area. Thanks in advance!

Pics - https://imgur.com/a/mYBnnwj
Video of noise - https://streamable.com/pveskk

It sounds like a chain/cog problem, as though the derailleur isn't adjusted properly. Spinning the wheel so that the chain isn't moving, and the noise not being there, strongly suggests the problem is in the derailleur adjustment. Was it working okay and then the noise just suddenly started? Did you install a new derailleur? Did you put a new chain on, and it's not the right one for the cogs? (i.e. a 10 speed chain on a 7 speed cassette).

I take it that the noise only happens with the chain on the smallest cog. If so, then the high limit screw needs adjusting. But you really need to adjust the low limit screw, too, and index the derailleur.

Do you know how to adjust the derailleur, including indexing it on the intermediate cogs? Park Tool has a video to show you how to properly adjust a derailleur. You need to have the back wheel off the floor to adjust it. It's not a difficult job to do but if you never did one, before, it can be confusing. If you run into difficulties, a bike shop should be able to adjust it for you in just a few minutes.
If I knew how to ride a bike properly, I'd do it every time.
  Reply
#3
Could be anything, really... in my experience it can be really difficult to pinpoint the source or even the area.

Apart from Charley's suggestions (do that first), check the pedals for play and the bottom bracket. Noise getting worse under load is typical for these. Heck, I've got a saddle that would fit your description (Fi:zik saddles are or at least were notorious for that).

Edit: check the older threads for more troubleshooting suggestions, e.g. by painkiller or Nigel Misso.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Tire Sizing (Or How to Buy A Tire)
Today 12:36 PM
Moving in Style: Beyond Regular Transpor...
Today 09:28 AM
The Roaming Radrunner Vlog 1 Why ride ...
Today 09:17 AM
Recording Bike Rides
Yesterday 01:37 AM
Ketone Ester $$$
11-19-2024 01:04 AM
Trek domane tyre
11-18-2024 01:58 PM
Old fossil buys Ebike
11-17-2024 06:39 AM
Bike bus
11-17-2024 12:14 AM
Second wheelset for ebike.
11-16-2024 08:20 PM
Humber "Eiffel Safety" bike 1800s
11-16-2024 03:05 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
22 posts
no avatar 2. enkei
19 posts
no avatar 3. GirishH
14 posts
no avatar 4. Flowrider
11 posts
no avatar 5. ReapThaWhirlwind
11 posts