Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Picked up another recycling project.
#1
Another recycling project.
Kuwahara Apollo. 24" chromoly frame.
Nice set of Araya wheels. Back 26x175 He, front 26X 150 HE.
 Lots of nice parts. $30. More pics to follow.
[Image: IMG_00002341_zps7exxgh3p.jpg~original]
[Image: IMG_00002346_zps4nczkkvk.jpg~original]
[Image: IMG_00002344_zpsnnv7zglj.jpg~original]
[Image: IMG_00002343_zpsj2trzdcc.jpg~original]
[Image: IMG_00002342_zpsne5xleki.jpg~original]
[Image: IMG_00002345_zpsmo41imrf.jpg~original]
"Where ever we go, there we are"
  Reply
#2
Nice.  Feel free to ship it to me Smile    I have a set of black hubbed 40H wheels with black Velocity Aeroheat rims that would look good on it, along with Nashbar City Slick tires.  Smile
Nigel
  Reply
#3
(04-09-2015, 12:20 PM)nfmisso Wrote:  Nice.  Feel free to ship it to me Smile    I have a set of black hubbed 40H wheels with black Velocity Aeroheat rims that would look good on it, along with Nashbar City Slick tires.  Smile

Hi Nigel, I take it you like this bike too. I'm looking forward to saving it from the scrap heap.  Too many real good bikes are being thrown away imo. It looks lightly used but not to well stored. I have a couple of things to finish up and then will jump into the repairs with both hands. The wheels on it are very good and very light. But the tires may need replacing.

Tell me! When you have narrow width wheels on the front versus the back, like this one has, are you suppose to put narrower width tires on the front to get the advantage of this set up?
"Where ever we go, there we are"
  Reply
#4
For the paved surfaces, I put narrower tires on front, by a ratio of approximately 4:5, for example my PDG has 32mm wide on the front and 40mm wide on the back.  All of my builds to date, have the same rims front and rear.  Your latest project appears to have a replacement front wheel based on the hub and rim designs.  The rear hub and rim look appropriate for the vintage, the front looks much newer.
Nigel
  Reply
#5
(04-09-2015, 04:37 PM)nfmisso Wrote:  For the paved surfaces, I put narrower tires on front, by a ratio of approximately 4:5, for example my PDG has 32mm wide on the front and 40mm wide on the back.  All of my builds to date, have the same rims front and rear.  Your latest project appears to have a replacement front wheel based on the hub and rim designs.  The rear hub and rim look appropriate for the vintage, the front looks much newer.

They are both Araya wheels. I have seen this combo on other bikes as well.

Had a good afternoon as I got the bike striped down and regreased the bottom bracket and headset.
"Where ever we go, there we are"
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
New to the Forum - Introduction
Yesterday 05:38 PM
Would you like a pizza after cycling?
Yesterday 02:10 AM
Hardtail as only bike?
07-12-2026 05:23 PM
Spoke Count Preference
07-12-2026 09:17 AM
Pros & Cons of presta valve vs schrader ...
07-12-2026 03:34 AM
Are you mainly into Mountain Biking, Roa...
07-12-2026 02:20 AM
New around here
07-11-2026 10:53 AM
Favorite MTB brand?
07-10-2026 03:16 AM
29"front & 26" rear? Thoughts?
07-10-2026 03:13 AM
suspicious broken part after service--is...
07-09-2026 02:45 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
27 posts
no avatar 2. meamoantonio
17 posts
no avatar 3. GirishH
17 posts
no avatar 4. ReapThaWhirlwind
15 posts
no avatar 5. Mr. Beanz
13 posts