Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the November Giveaway for a Single Speed Cruiser bike from Custom Villy


Gt pedal size issue. Need help
#1
Get guys, forum and bike repair noob here. I picked up a 1994 gt performer (always wanted one when I was a kid). The pedals are in bad shape and need to be replaced. I've done some research and 1/2 and 9/16 are the common size of pedals based on 1 or 3 piece cranks. I've measured the diamater of the threaded end and it's neither size. Anyone know off the bat whit size runs on my gt? It's bone stock btw.
  Reply
#2
Appears to be one piece crank, should be 1/2 inch, and should measure that as well.
  Reply
#3
The sizes are the maximum allowed major diameter of the threads, they will always be a bit under the size. For example, a 1/2" will probably measure around .49 inches.

Easiest thing is to remove one, take it to Wal-mart or local bike shop and compare.

Not one pedal has left hand threads, and the other has right hand threads.
Nigel
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
1,737
12-08-2019, 08:18 AM
Last Post: CharleyFarley
 
6,079
02-24-2017, 12:45 PM
Last Post: Mountain
 
11,597
02-09-2010, 12:15 AM
Last Post: megsellner
 
5,468
08-07-2009, 03:41 AM
Last Post: Joe_W

Forum Jump:

[-]
10 Latest Posts
Little video series some buddies and i d...
Yesterday 06:34 PM
Multi-tool recommendation
Yesterday 06:15 PM
OCHSNER EARLY-MID 80s
Yesterday 11:36 AM
Hi
Yesterday 08:40 AM
Food delivery guy in need for advice abo...
11-25-2020 05:13 PM
HI
11-25-2020 04:53 PM
New member introduction Vancouver BC
11-25-2020 04:52 PM
Hello!
11-25-2020 05:41 AM
Hi guys
11-24-2020 10:32 AM
thinking of buying a new bike, are Trinx...
11-23-2020 06:18 PM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
46 posts
no avatar 2. Painkiller
16 posts
no avatar 3. Nikko
12 posts
no avatar 4. G_M
10 posts
no avatar 5. Sagan97
8 posts