Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the October Giveaway for a Whiskey Tango Foxtrot urban gravel bike from Van Dessel Cycles


I need the right fender set for my bike
#1
i am getting fenders for my bicycle but i dont know how to get the correct ones thru the mail. is there someone that knows how to get me the fenders i need.
i am Guillen... ♀♂☺↔☼♪♫♂͡♂♂♂♀☺☻░▒▓♥▲♂♀♫♪☼
  Reply
#2
(11-30-2014, 11:23 AM)guillenis41 Wrote:  i am getting fenders for my bicycle but i dont know how to get the correct ones thru the mail. is there someone that knows how to get me the fenders i need.

more info would help, what bike, what tire size and so on. post some pics of your bike and the mounting areas such as top and bottom of stay's and fork legs and crown area
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
hello wow that was fast i am guillen from jackson heights new york and thank you for your time , i will be uploading the images of the bike and yea thats a good idea but for the time now my bike is the specialized and is at this address

http://www.specialized.com/us/en/bikes/archive/2009/carmel26/womensglobecarmel126#specs

and is the Gloss Silver Blue
also i have already bought the Pyramid Cruiser Bicycle Fenders, Full, Black
Fits 26" x 2.125" tires
Black color
Full front and rear
Steel
thank you very much [:-)
this is the issue and since i wait for fenders to come home i think i bought the wrong ones , am i right?
  Reply
#4
(11-30-2014, 11:37 AM)guillenis41 Wrote:  hello wow that was fast i am guillen from jackson heights new york and thank you for your time , i will be uploading the images of the bike and yea thats a good idea but for the time now my bike is the specialized and is at this address

http://www.specialized.com/us/en/bikes/archive/2009/carmel26/womensglobecarmel126#specs

and is the Gloss Silver Blue
also i have already bought the Pyramid Cruiser Bicycle Fenders, Full, Black
Fits 26" x 2.125" tires
Black color
Full front and rear
Steel
thank you very much [:-)
this is the issue and since i wait for fenders to come home i think i bought the wrong ones , am i right?
cannot answer about if wrong or not, but do not like the term "cruiser" in the description. If the front has two long u shaped braces it may be an issue yours will need to mount on the fork arch in the middle up top. size wise you should be fine. you can always take off the front brace and make a top center mount to attach. but you may have a hole or two in your fender that may or may not be a big deal to you.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
https://www.facebook.com/media/set/?set=a.799232186790468.1073741840.100001110822771&type=1&l=2bbcffa84a

here is the images for my bike i just took them outside.[:-)
  Reply
#6
(11-30-2014, 01:13 PM)guillenis41 Wrote:  https://www.facebook.com/media/set/?set=a.799232186790468.1073741840.100001110822771&type=1&l=2bbcffa84a

here is the images for my bike i just took them outside.[:-)
looks like the rear will be ok, the front will take some creativity for the lower brace mount no matter which set you get when trying to install full fender to a front shock setup. at least you have a center hole in your fork brace. Nigel Misso will chime in on this I am sure after he see's this. He is the man when it comes to fender's and will offer some sound suggestions.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#7
ok so the Pyramid Cruiser Bicycle Fenders, Full, Black
Fits 26" x 2.125" tires
Black color
Full front and rear
Steel
will fit the back but the front will need some help right?
do you know what brand fender set of steel will fit my bike?[:-)
  Reply
#8
(11-30-2014, 01:39 PM)guillenis41 Wrote:  ok so the Pyramid Cruiser Bicycle Fenders, Full, Black
Fits 26" x 2.125" tires
Black color
Full front and rear
Steel
will fit the back but the front will need some help right?
do you know what brand fender set of steel will fit my bike?[:-)

correct, most will need patience to install. front shocks always
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#9
and sorry for late post i was receiving my first amazon delivery of
2 of Sunlite Thorn Resistant Bicycle Tube 26 x 1.50-1.95 SCHRADER Valve
and
2 of Schwinn Street Comfort Bike Tire with Kevlar (Black, 26 x 1.95-Inch)
[:-)
  Reply
#10
First can you send the cruiser fenders back? They are expensive, heavy, and it will take more to adapt them to your bike than other fenders would.

These would be MUCH better: http://www.amazon.com/Pyramid-MTB-Full-Fenders-Black/dp/B000AO5IVC/

In any case, for the front, you will need P-clamps to wrap around the bottom of the shocks and provide an attachment point for fenders; like on the front of my green GT:
http://forums.bikeride.com/attachment.php?aid=3352

If you keep the cruiser fenders, you may need two per side; one going back/down, one going forward/up. In addition, you may need so extension brackets, because the stays do not appear to be adjustable.

Nylon P-Clamps are fine for the job, which you can get at Harbor Freight for a very low price for an assortment. Make sure you get the black ones, and the white nylon will degrade very quickly in sun light.
Nigel
  Reply
#11
Thanks Nigel, I knew you were the man! The right fender wrong bike! ha . Post before you buy Is always the number 1 rule! Smile
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#12
ok this is good news and thats what i was thinking, i bought the wrong fenders. so Nigel you say that the Pyramid MTB Full Fenders Black will fit and i am happy but i want fenders made of steel do you know what else will work for me ?[:-) i am looking for a long lasting fender. I am trying to make the bike look good too you know, as the ride looks good then you feel better too i guess this is my issue for now.
hello guys look i already made contact with Niagara Cycle Works who are sending my order from amazon and effectively the shop said wait till monday and i can chat with someone at office about the fenders .
but guys what fenders will work for the bike ?
i will greatly appreciate all the help i can get [:-)
  Reply
#13
hello i was looking at nigel's bike and i see how the front fender P-clamps wrap around the bottom of the shocks and provide an attachment point for fenders and it works , i am getting ideas but i have hope to get the perfect fit .[:-)
  Reply
#14
(11-30-2014, 03:06 PM)guillenis41 Wrote:  hello i was looking at nigel's bike and i see how the front fender P-clamps wrap around the bottom of the shocks and provide an attachment point for fenders and it works , i am getting ideas but i have hope to get the perfect fit .[:-)
with a shock on front you would need enduro style fenders and that is not not the type you want. there is no other fit for the front shock other that the clamps as there are no eyelets on the rear of the fork. It will be a functional makeshift application.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#15
i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793
  Reply
#16
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

what Nigel has picture is really your only option, for your bike plastic is the way to go. They are lighter, do not dent, quieter, last a long time, and often less expensive. The rest is up to you, your question has pretty much been answered. P.S. I noticed you are or were in the service. A big thanks and a shout out to you and all your brother's in arms!
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#17
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

oh i see so this will not work either and i have till monday before i get in contact with Niagara Cycle Works wow what a issue this will be a best way in to getting my fenders thank you for the time i will be here to get more information [:-)
thank you B
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

what Nigel has picture is really your only option, for your bike plastic is the way to go. They are lighter, do not dent, quieter, last a long time, and often less expensive. The rest is up to you, your question has pretty much been answered. P.S. I noticed you are or were in the service. A big thanks and a shout out to you and all your brother's in arms!

Thank You Brother [:-)
? are you from the U.S.?
  Reply
#18
(11-30-2014, 03:37 PM)guillenis41 Wrote:  
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

oh i see so this will not work either and i have till monday before i get in contact with Niagara Cycle Works wow what a issue this will be a best way in to getting my fenders thank you for the time i will be here to get more information [:-)
thank you B
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

what Nigel has picture is really your only option, for your bike plastic is the way to go. They are lighter, do not dent, quieter, last a long time, and often less expensive. The rest is up to you, your question has pretty much been answered. P.S. I noticed you are or were in the service. A big thanks and a shout out to you and all your brother's in arms!

Thank You Brother [:-)
? are you from the U.S.?
Yes sir, corn fed Illinois Boy! really just an old has been that never was! ha. Smile
Welcome to the tutor and be sure to post back your results!
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#19
(11-30-2014, 03:52 PM)painkiller Wrote:  
(11-30-2014, 03:37 PM)guillenis41 Wrote:  
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

oh i see so this will not work either and i have till monday before i get in contact with Niagara Cycle Works wow what a issue this will be a best way in to getting my fenders thank you for the time i will be here to get more information [:-)
thank you B
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

what Nigel has picture is really your only option, for your bike plastic is the way to go. They are lighter, do not dent, quieter, last a long time, and often less expensive. The rest is up to you, your question has pretty much been answered. P.S. I noticed you are or were in the service. A big thanks and a shout out to you and all your brother's in arms!

Thank You Brother [:-)
? are you from the U.S.?
Yes sir, corn fed Illinois Boy! really just an old has been that never was! ha. Smile
Welcome to the tutor and be sure to post back your results!

well done! [:-)
(11-30-2014, 04:08 PM)guillenis41 Wrote:  
(11-30-2014, 03:52 PM)painkiller Wrote:  
(11-30-2014, 03:37 PM)guillenis41 Wrote:  
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

oh i see so this will not work either and i have till monday before i get in contact with Niagara Cycle Works wow what a issue this will be a best way in to getting my fenders thank you for the time i will be here to get more information [:-)
thank you B
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

what Nigel has picture is really your only option, for your bike plastic is the way to go. They are lighter, do not dent, quieter, last a long time, and often less expensive. The rest is up to you, your question has pretty much been answered. P.S. I noticed you are or were in the service. A big thanks and a shout out to you and all your brother's in arms!

Thank You Brother [:-)
? are you from the U.S.?
Yes sir, corn fed Illinois Boy! really just an old has been that never was! ha. Smile
Welcome to the tutor and be sure to post back your results!

well done! [:-)

am are you gonna help me more?
(11-30-2014, 04:08 PM)guillenis41 Wrote:  
(11-30-2014, 03:52 PM)painkiller Wrote:  
(11-30-2014, 03:37 PM)guillenis41 Wrote:  
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

oh i see so this will not work either and i have till monday before i get in contact with Niagara Cycle Works wow what a issue this will be a best way in to getting my fenders thank you for the time i will be here to get more information [:-)
thank you B
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

what Nigel has picture is really your only option, for your bike plastic is the way to go. They are lighter, do not dent, quieter, last a long time, and often less expensive. The rest is up to you, your question has pretty much been answered. P.S. I noticed you are or were in the service. A big thanks and a shout out to you and all your brother's in arms!

Thank You Brother [:-)
? are you from the U.S.?
Yes sir, corn fed Illinois Boy! really just an old has been that never was! ha. Smile
Welcome to the tutor and be sure to post back your results!

well done! [:-)
(11-30-2014, 04:08 PM)guillenis41 Wrote:  
(11-30-2014, 03:52 PM)painkiller Wrote:  
(11-30-2014, 03:37 PM)guillenis41 Wrote:  
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

oh i see so this will not work either and i have till monday before i get in contact with Niagara Cycle Works wow what a issue this will be a best way in to getting my fenders thank you for the time i will be here to get more information [:-)
thank you B
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.
(11-30-2014, 03:29 PM)painkiller Wrote:  
(11-30-2014, 03:16 PM)guillenis41 Wrote:  i was looking at this fenders Wald Balloon 962-26" Fenders Width: 50 - 54 mm
Fits Wheel Size: 26x2.0-2.125"
http://www.universalcycles.com/shopping/product_details.php?id=39115&category=1793

same problem as your initial set, they are really for single speed cruiser bikes. your fork throws a wrench in the works if not designed for fender's.

what Nigel has picture is really your only option, for your bike plastic is the way to go. They are lighter, do not dent, quieter, last a long time, and often less expensive. The rest is up to you, your question has pretty much been answered. P.S. I noticed you are or were in the service. A big thanks and a shout out to you and all your brother's in arms!

Thank You Brother [:-)
? are you from the U.S.?
Yes sir, corn fed Illinois Boy! really just an old has been that never was! ha. Smile
Welcome to the tutor and be sure to post back your results!

well done! [:-)

am are you gonna help me more?

i will be very happy..
  Reply
#20
Hell yea! thats what we do here. Always happy to try to guide people in the right direction.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
460
06-26-2020, 07:41 AM
Last Post: DoctorGonzo
 
29,244
08-09-2016, 04:01 PM
Last Post: fulltimerart
 
6,999
03-14-2013, 02:12 PM
Last Post: nfmisso
 
9,325
08-18-2009, 02:58 AM
Last Post: Joe_W

Forum Jump:

[-]
10 Latest Posts
Shimano tourney
Today 12:53 PM
Biking in the rain
Today 04:30 AM
2020 road cycling season
Yesterday 07:29 PM
hello from the windy city
Yesterday 07:24 PM
Year & Price on this Miyata 600GT
Yesterday 06:17 PM
SUPER LUBRICANTS
Yesterday 05:04 AM
What do you like about gravel bikes?
Yesterday 05:03 AM
Rossin CL score
Yesterday 04:49 AM
How to remove a Dork disc
10-20-2020 08:32 PM
400 lb. weight limit bikes
10-19-2020 10:38 PM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
28 posts
no avatar 2. Painkiller
9 posts
no avatar 3. Sagan97
7 posts
no avatar 4. Evan J Green
6 posts
no avatar 5. G_M
6 posts