Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Spin Doctor vs Nashbar Tools
#1
Ok, I live in a city that doesn't have a bicycle shop and I only see bicycles around once in a while. I want to start a very small bicycle business out of my home for starters. I don't want to spend a fortune on tools, even though I can write them off as a business expense, I don't have that kind of cash flow for something that I'm not sure will completely take off. It will be more like a part time thing.

Right now I don't have a whole lot of funds to get it going and I don't want to take out a small business loan. I was looking at a couple tool kits for starters, and I'm getting a craftsman automotive tool kit I've wanted for a long time to help out.

I did the search and didn't find what I was looking for on the forum, so here I am.
I'm debating between a spin doctor tool kit, a nashbar tool kit, or super B. I just want to know which one has a better reputation and will hold up better. If you have other suggestions that won't break the bank, let me know!

Spind Doctor:
Option 1)
http://www.performancebike.com/bikes/Product_10052_10551_1030354_-1_400154__400154

Option 2)
http://www.performancebike.com/bikes/Product_10052_10551_1122045_-1_400154__400154

Nashbar:
Option1 )
http://www.nashbar.com/bikes/Product_10053_10052_524452_-1___204838#ReviewHeader

Option 2)
http://www.nashbar.com/bikes/Product_10053_10052_551678_-1___204838

Option 3)
http://www.nashbar.com/bikes/ProductDisplay?catalogId=10052&storeId=10053&productId=551678&langId=-1&parent_category_rn=204676&top_category=

Super B:
http://www.rei.com/product/796354/super-b-deluxe-tool-kit

Torque wrench Kit, Nashbar:
http://www.nashbar.com/bikes/Product_10053_10052_552787_-1___204676

Torque wrench kit, Spin Doctor:
http://www.performancebike.com/bikes/Product_10052_10551_1134890_-1___400625

Super B Torque Wrench sets:
http://www.superbiketool.com/prod3.asp?menu=3&cid=8
  Reply
#2
Ok, let me be perfectly honest. I buy brand new bikes and put engines on them, however, bicycle work is going to be a must to help keep my business running. So the bikes I'll be servicing will be the ones I build. They have the engine work I have tools for and I want to get into working on their bike maintenance as well. These are mainly all beach cruisers, with the occasional mountain bike.
  Reply
#3
To be quite honest, I know I'll need a quite a few of the basic tools. Such as removing cranks, pedals, cassettes, and changing axles, possible some trueing of the tires, a chain breaker etc right off the bat, some special kits require changing those parts, and I like getting tires I have as straight as possible. Also, some of the rear coaster breaks require periodic tightening and I'd like to be able to repack bearings and such.
Also, if I buy used bikes, I want to be able to get them in prime condition before adding an engine, maybe upgraded parts like a hardened steel axle and such like that. They won't be used as heavily as a bicycle shop, but more than the average person.
  Reply
#4
Based on what you said, I'd avoid a tool kit & order specifically for your needs.
Mainly cruisers, right? You know you need a few cone wrenches (thin open end). Some headset wrenches wouldn't hurt, they are also thin & flat. The rest of your wrench needs will be in your Craftsman tool kit, along with the 4, 5 & 6mm hex heads (allen wrenches).
You don't need a pedal tool for any cruiser I've ever seen.
You've got to stock up on cassette & freewheel removal tools. You really only need 3 or 4.
I would buy a cable & cable housing cutter, I have a Pedros tool that does both.
I wouldn't invest in a truing stand at first. Just get some good spoke (nipple) wrenches.
Get a bike grease injector.
Get some bike oil. NO WD-40.
You could get some bottom bracket tools, a couple should suffice, but you could put that off for awhile.
A chain tool. Chain oil. A chain cleaning (reservoir) tool. This is controversial, but motorized bikes are gonna eat chains anyway. I'd keep chains in stock along with cassettes & freewheels.
I could go on & on, you might want to look at the Park Tool website. The repair section there shows what tools are needed for a given job.
  Reply
#5
Ok, now with working on mountain bikes, what tools will I need?
  Reply
#6
You would add the common bottom bracket tool for sure. I'd keep some cable/housing (kits or bulk) around. Some spare Kool Stop Salmon brake pads too, Supra 2 and Eagle 2 (for Cantilever brakes).
To get started you don't need much.
If you wanted to be extra fancy you could get a rear derailleur alignment tool, the Park is often online under $100, but you really need a dead on true rear wheel to use as a reference.
Oh yeah, bulk ball bearings, I get them from a BB wholesaler.
I would be surprised if you needed disc brake tools.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:39 PM
Expensive bikes with crappy wheels
Today 10:15 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
16 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts