Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


I cannot turn the wheel. It gets stuck
#1
Hello! Could you help me please. Today when I was riding it happened I think ten times. I try to turn the wheel, but the handlebar gets stuck. I push it harder and then it goes. What could that be?

The bicycle is relatively new (6 months or something).
  Reply
#2
Probably need more information on your particular bike to make a better determination of the problem. Pictures would help also.

Perhaps a bearing has gone bad.
  Reply
#3
(03-29-2014, 02:21 PM)RBurrelli Wrote:  Probably need more information on your particular bike to make a better determination of the problem. Pictures would help also.

Perhaps a bearing has gone bad.

Thank you for your reply. Do you think it is a bearing? The wheel rotates fine. Turning left and right is a problem.


The bike is GT Laguna 2013

The picture and the sepcs are here:

http://www.all-about-the-bike.co.uk/gt-laguna-2013-womens-mountain-bike---fully-assembled-6115-p.asp
  Reply
#4
There is a problem with the *headset* bearing that is responsible for turning the fork - could be adjusted too tight in addition to excessive wear, or some other problem. The "Aheadset" is a threadless headset, so if you don't want to take it to a shop, co-op or a knowledgeable friend Google "adjust threadless headset" or a refer to a similar video on this site.
  Reply
#5
(03-30-2014, 11:03 AM)cny-man Wrote:  There is a problem with the *headset* bearing that is responsible for turning the fork - could be adjusted too tight in addition to excessive wear, or some other problem. The "Aheadset" is a threadless headset, so if you don't want to take it to a shop, co-op or a knowledgeable friend Google "adjust threadless headset" or a refer to a similar video on this site.

Thanks you very much for your help! I found a video on the youtube.
  Reply
#6
You need to open up the headset and check the bearings, sounds like it was never greased. Unless its sealed bearings. Than they are set too tight and possibly damaged by now check and make sure they turn smoothly no gritty feeling,
Check this site for info.

Here is more info.

http://sheldonbrown.com/gloss_ha-i.html#headset
Never Give Up!!!
  Reply
#7
Thank you, guys! You saved my day! I adjusted the top bot on the headset, and now everything is OK.

Thank you again!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
78,452
06-30-2023, 10:09 AM
Last Post: GirishH
 
6,673
04-16-2023, 09:46 PM
Last Post: froze
 
9,473
10-17-2022, 08:14 PM
Last Post: Jesper
 
44,790
04-14-2021, 01:28 AM
Last Post: Jesper
 
6,139
07-22-2020, 07:08 PM
Last Post: Jesper
 
4,896
03-08-2020, 02:34 PM
Last Post: G_M

Forum Jump:

[-]
10 Latest Posts
How new adventures begin..
Today 03:01 PM
Vintage (and mint) Torelli...unknown yea...
Yesterday 06:32 PM
Andre leducq bike. Any idea on value
Yesterday 06:03 PM
Hoping someone can help me identify this...
Yesterday 05:42 PM
What bike is this
Yesterday 05:22 PM
Shortness of breath.
Yesterday 04:55 PM
trace - what used to take several apps a...
Yesterday 03:16 AM
Impromptu bikepacking/touring dilemma..
09-05-2026 11:34 PM
What's the longest bike journey you've e...
09-04-2026 10:01 AM
Would you like a pizza after cycling?
09-04-2026 09:59 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
27 posts
no avatar 2. GirishH
19 posts
no avatar 3. SPINMAN
11 posts
no avatar 4. froze
11 posts
no avatar 5. Sidewinder
11 posts