Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


I cannot turn the wheel. It gets stuck
#1
Hello! Could you help me please. Today when I was riding it happened I think ten times. I try to turn the wheel, but the handlebar gets stuck. I push it harder and then it goes. What could that be?

The bicycle is relatively new (6 months or something).
  Reply
#2
Probably need more information on your particular bike to make a better determination of the problem. Pictures would help also.

Perhaps a bearing has gone bad.
  Reply
#3
(03-29-2014, 02:21 PM)RBurrelli Wrote:  Probably need more information on your particular bike to make a better determination of the problem. Pictures would help also.

Perhaps a bearing has gone bad.

Thank you for your reply. Do you think it is a bearing? The wheel rotates fine. Turning left and right is a problem.


The bike is GT Laguna 2013

The picture and the sepcs are here:

http://www.all-about-the-bike.co.uk/gt-laguna-2013-womens-mountain-bike---fully-assembled-6115-p.asp
  Reply
#4
There is a problem with the *headset* bearing that is responsible for turning the fork - could be adjusted too tight in addition to excessive wear, or some other problem. The "Aheadset" is a threadless headset, so if you don't want to take it to a shop, co-op or a knowledgeable friend Google "adjust threadless headset" or a refer to a similar video on this site.
  Reply
#5
(03-30-2014, 11:03 AM)cny-man Wrote:  There is a problem with the *headset* bearing that is responsible for turning the fork - could be adjusted too tight in addition to excessive wear, or some other problem. The "Aheadset" is a threadless headset, so if you don't want to take it to a shop, co-op or a knowledgeable friend Google "adjust threadless headset" or a refer to a similar video on this site.

Thanks you very much for your help! I found a video on the youtube.
  Reply
#6
You need to open up the headset and check the bearings, sounds like it was never greased. Unless its sealed bearings. Than they are set too tight and possibly damaged by now check and make sure they turn smoothly no gritty feeling,
Check this site for info.

Here is more info.

http://sheldonbrown.com/gloss_ha-i.html#headset
Never Give Up!!!
  Reply
#7
Thank you, guys! You saved my day! I adjusted the top bot on the headset, and now everything is OK.

Thank you again!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
76,620
06-30-2023, 10:09 AM
Last Post: GirishH
 
41,077
04-14-2021, 01:28 AM
Last Post: Jesper
 
5,848
07-22-2020, 07:08 PM
Last Post: Jesper
 
4,614
03-08-2020, 02:34 PM
Last Post: G_M
 
9,839
02-06-2016, 07:17 PM
Last Post: Lighttower
 
14,363
05-19-2015, 08:48 AM
Last Post: alexwang32
 
13,796
10-24-2014, 04:07 PM
Last Post: cny-man

Forum Jump:

[-]
10 Latest Posts
How do you jump?
Yesterday 06:46 PM
Newbie from South Florida
Yesterday 02:24 PM
Cycle packing or learning from other lon...
Yesterday 09:14 AM
New Jersey's New E-bike Law
02-09-2026 03:12 PM
Hello, everyone!
02-09-2026 03:10 AM
Rim Depth Preference
02-08-2026 12:52 AM
How to keep your bicycle safe?
02-07-2026 12:26 PM
How can I fuse & wire U7 headlights to Y...
02-06-2026 12:28 PM
Anyone tried Montella Cycling? What size...
02-02-2026 04:50 AM
Cheating on your bicycle
02-02-2026 03:16 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
18 posts
no avatar 2. Flowrider
16 posts
no avatar 3. GirishH
16 posts
no avatar 4. rydabent
12 posts
no avatar 5. meamoantonio
11 posts