Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Vitesse Signal Giveaway's Winner Announced


I cannot turn the wheel. It gets stuck
#1
Hello! Could you help me please. Today when I was riding it happened I think ten times. I try to turn the wheel, but the handlebar gets stuck. I push it harder and then it goes. What could that be?

The bicycle is relatively new (6 months or something).
  Reply
#2
Probably need more information on your particular bike to make a better determination of the problem. Pictures would help also.

Perhaps a bearing has gone bad.
  Reply
#3
(03-29-2014, 02:21 PM)RBurrelli Wrote:  Probably need more information on your particular bike to make a better determination of the problem. Pictures would help also.

Perhaps a bearing has gone bad.

Thank you for your reply. Do you think it is a bearing? The wheel rotates fine. Turning left and right is a problem.


The bike is GT Laguna 2013

The picture and the sepcs are here:

http://www.all-about-the-bike.co.uk/gt-laguna-2013-womens-mountain-bike---fully-assembled-6115-p.asp
  Reply
#4
There is a problem with the *headset* bearing that is responsible for turning the fork - could be adjusted too tight in addition to excessive wear, or some other problem. The "Aheadset" is a threadless headset, so if you don't want to take it to a shop, co-op or a knowledgeable friend Google "adjust threadless headset" or a refer to a similar video on this site.
  Reply
#5
(03-30-2014, 11:03 AM)cny-man Wrote:  There is a problem with the *headset* bearing that is responsible for turning the fork - could be adjusted too tight in addition to excessive wear, or some other problem. The "Aheadset" is a threadless headset, so if you don't want to take it to a shop, co-op or a knowledgeable friend Google "adjust threadless headset" or a refer to a similar video on this site.

Thanks you very much for your help! I found a video on the youtube.
  Reply
#6
You need to open up the headset and check the bearings, sounds like it was never greased. Unless its sealed bearings. Than they are set too tight and possibly damaged by now check and make sure they turn smoothly no gritty feeling,
Check this site for info.

Here is more info.

http://sheldonbrown.com/gloss_ha-i.html#headset
Never Give Up!!!
  Reply
#7
Thank you, guys! You saved my day! I adjusted the top bot on the headset, and now everything is OK.

Thank you again!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
66,323
06-30-2023, 10:09 AM
Last Post: GirishH
 
8,104
02-06-2016, 07:17 PM
Last Post: Lighttower
 
12,072
05-19-2015, 08:48 AM
Last Post: alexwang32
 
8,246
03-02-2014, 11:57 PM
Last Post: cny-man
 
9,102
02-19-2014, 03:33 AM
Last Post: GeorgeET
 
10,356
06-01-2013, 06:58 PM
Last Post: Painkiller

Forum Jump:

[-]
10 Latest Posts
Happy Holidays
Today 07:25 AM
What was your favourite bicycle?
Yesterday 12:33 PM
How to Trick out your Recumbent Tadpole ...
12-20-2024 09:47 AM
How many bikes do you have now?
12-20-2024 08:24 AM
Energy gels for cycling
12-20-2024 06:53 AM
New , To me ..
12-20-2024 04:06 AM
need e-trike advice (wife knee surgery)
12-20-2024 03:58 AM
Looking for Recommendations: E-Trike for...
12-20-2024 03:55 AM
How often check or change mechanical dis...
12-20-2024 03:48 AM
Ketone Ester $$$
12-20-2024 01:54 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Alexjohnson
41 posts
no avatar 2. GirishH
24 posts
no avatar 3. Flowrider
13 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. Bweighmaster
9 posts