Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the June Giveaway for a Foldylock Pride bike lock by Seatylock


New mtb forks?
#1
Hi, newboy here.

I have recently been given a mountain bike, it is a silverfox bigfoot attitude. The reason i was given it was that it has been sat at the bottom of a garden for 3 years and has rusted somewhat.

The chain is a solid piece of rusty metal, the brakes were all seized (disks front and rear) the freewheel is ruined and the front cogs haven't faired much better.
But the worst part as far as i can tell is the forks. They are what i believe are downhill style forks, but are only sprung, no oil or air suspension here!! They sit on the bike in a triple set and the tubes are quite badly rusted, some of the chrome has come off and they do not move that well.

My question then, are these things worth saving? or is it just easier to replace them?

Leading to Q2. Can the downhill style forks be changed for the more common type of suspention forks with a single tube through the headstock?

Thanks for any help guys and girls.
  Reply
#2
I think you could swap for normal forks. But I think the bigger question is whether to bother. Unless this is a much higher end model than I'm seeing, it looks like these go used for $50-$150. If so, probably not worth trying to bring this one back to life. You'll spend at least that much just to get it functional and it may still have bearing, shifter, etc, etc. damage. Sadly, it may best used to strip for parts. But of course, this all depends on what level of bike it is and what access you have to replacement parts, etc.
  Reply
#3
The reviews are pretty awful:
http://www.amazon.co.uk/Silverfox-Attitude-Speed-Unisex-Mountain/dp/B000N6SR2O

and they appear to be not in much demand:
http://www.ebay.co.uk/itm/Silverfox-Attitude-Bigfoot-Bike-/221266272876?pt=UK_Bikes_GL&hash=item33847f626c

Unless there is something special for you in it; I recommend parting it out.
Nigel
  Reply
#4
Thanks for the replies chaps.

Yeah, i get that its a cheap bike, but it was a freebee, and i don't have money to burn. My idea is to get this one ride worthy, then upgrade all the parts individually when i have the money.

I am planning on upgrading (better quality than stock) all the running gear, freewheel, front cogs, pedal arms, derailliers (F&R) axles and wheel bearings, also the pedal crank (all for around £100 ($155). Most of the list was knackered anyway, so a no-brainer. The frame is in good nick, and pretty light, as far as i'm concerned, I'm a big lump, so the weight was never going to be an issue.

If i get some decent forks in there it'll be a relatively decent bike for me. I haven't really ridden a pushbike for 15 years or so, so anything is better than nothing, and without having thousands to spend, its good enough for now

Is the stem size of 1 1/8 inches an industry standard now?
  Reply
#5
I think our point is that you could buy a comparable, fully functioning bike for less than it will cost you to fix this one. If you can get all the drivetrain parts for $155 and then buy any decent suspension fork, I'd think you're going to be over $300. You say the brakes are seized, you may need new calipers, disks and pads too. But there are a lot of factors that could affect that so you'll need to decide.

I think 1 1/8 is fairly standard still. You should be able to find forks this size. Pay attention to whether you need threaded or threadless.
  Reply
#6
This project is now complete.
  Reply
#7
(09-10-2013, 08:56 AM)BIGMat Wrote:  .....
This project is now complete.

Mat; not quite - you have to post pictures here before you can declare it complete Smile
Nigel
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
13,285
09-29-2015, 10:35 PM
Last Post: Painkiller
 
11,840
06-03-2014, 07:44 PM
Last Post: Matt9
 
18,731
02-15-2014, 06:22 PM
Last Post: nfmisso
 
5,533
09-17-2012, 03:03 AM
Last Post: Joe_W
 
8,535
05-15-2012, 02:10 AM
Last Post: mike46
 
16,575
04-22-2012, 01:51 PM
Last Post: Joe_W

Forum Jump:

[-]
10 Latest Posts
front derailleur won't go largest cog
Yesterday 10:49 PM
Road helmet
06-21-2021 02:49 PM
How to keep your bicycle safe?
06-20-2021 11:58 AM
How often do you use suspension fork loc...
06-20-2021 09:53 AM
what is good length for a folding lock?
06-20-2021 09:44 AM
Star blubike lube
06-20-2021 09:42 AM
It's here! Biking Down a Volcano at 58mp...
06-20-2021 09:28 AM
2021 Pro Road Cycling
06-20-2021 09:27 AM
Ethical Dilemma
06-18-2021 09:43 PM
Champagnolo Say None of Their Cranksets ...
06-17-2021 08:06 PM

[-]
Top 5 Posters This Month
no avatar 1. ReapThaWhirlwind
46 posts
no avatar 2. Jesper
22 posts
no avatar 3. JoJoJo
11 posts
no avatar 4. Zviedrs
10 posts
no avatar 5. iemand85
7 posts